GB/T 16422.1-2006 Replaced National standards

GB/T 16422.1-2006 Plastics—Methods of the exposure to laboratory light sources—Part 1:General guidance

GB/T 16422.1-2006 Plastics—Methods of the exposure to laboratory light sources—Part 1:General guidance

Publish Date: 2006-09-01 Implement Date: 2007-02-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 16422.1-2006

Standard Type: National standards

Standard Status: Replaced

is_force_gb: no

CCS Name: Basic standards and general methods for synthetic resins and plastics

ICS Name: Plastic Composite

Publish Date: 2006-09-01

Implement Date: 2007-02-01

Pages: 16 pages

Scope

1.1 This section provides information and general guidelines for selecting and implementing exposure methods, which are described in detail in subsequent sections. It also describes and recommends methods for measuring irradiance and radiation dose, and outlines the equipment requirements for monitoring air temperature and the surface temperature of dark and light-colored materials within enclosures. 1.2 This section also provides information on the interpretation of accelerated exposure test data. For more information on methods for measuring changes in plastic performance after exposure and presenting the results, see ISO 4582.

Development Information

Word Count: 27 Thousand words Pages: 16 pages

Replace the following standards

GB/T 16422.1-1996 Plastics—Methods of exposure to laboratory light sources Part 1:General guidance

Superseded by the following standards

GB/T 16422.1-2019 Plastics—Methods of exposure to laboratory light sources—Part 1:General guidance

Referenced Standards

GB/T 2918-1998 Plastics—Standard atmospheres for conditioning and testing GB/T 16422.2-1999 Plastics—Methods of exposure to laboratory light sources—Part 2:Xenon—arc sources GB/T 16422.3-1997 Plastics—Methods of exposure to laboratory light sources—Part 3:Fluorescent UV lamps GB/T 16422.4-1996 Plastics—Methods of exposure to laboratory light sources—Part 4:Open flame carbon arc lamp GB/T 17037.1-1997 Injection moulding of test specimens of thermoplastic materials—Part 1:General principles and moulding of multipurpose and bar test specimens GB/T 17037.3-2003 Plastics—Injection moulding of test specimens of thermoplastic materials—Part 3:Small plates ISO 293:1986 ISO 294-2:1996 ISO 295:1991 ISO 2557-1:1989 ISO 2818:1994 ISO 3167:1993 ISO 4582:1993 ISO 9370:1997 CIE出版物No.85:1989

Adopt standards

ISO 4892-1:1999

Related Standards

GB/T 12000-1989 Replaced

GB/T 12000-1989 Plastics—Test methods of exposure to damp heat, steady state

Publish Date: 1989-12-25

GB/T 15585-1995 Abolished

GB/T 15585-1995 Determination of shrinkage for injection moulding thermoplastics

Publish Date: 1995-06-12

GB/T 15596-1995 Replaced

GB/T 15596-1995 Plastics—Determination of changes in Color and variations in properties after exposure to daylight under glass, natural weathering or artificial light

Publish Date: 1995-06-12

GB/T 15598-1995 abolished_transferred

GB/T 15598-1995 Testing methods for shear strength of plastics by punch tool

Publish Date: 1995-06-12

GB/T 1843-1996 Replaced

GB/T 1843-1996 Plastics—Determination of izod impact strength

Publish Date: 1996-06-14

GB/T 2035-1996 Replaced

GB/T 2035-1996 Terms and definitions for plastics

Publish Date: 1996-06-14