GB/T 15678-1995
Replaced
GB/T 3875-2006
Replaced
National standards
GB/T 3875-2006 Tungsten sheet
GB/T 3875-2006 Tungsten sheet
Basic Information
Standard Code:
GB/T 3875-2006
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Rare high-melting-point metals and their alloys
ICS Name:
Other non-ferrous metal products
Publish Date:
2006-09-26
Implement Date:
2007-02-01
Pages:
7 pages
Scope
This standard specifies the requirements, test methods, inspection rules, and marking, packaging, transportation, storage, and order form content for tungsten plates. This standard applies to tungsten plates produced by rolling from powder metallurgy billets or slabs.
Development Information
Replace the following standards
Superseded by the following standards
Referenced Standards
GB/T 3850-1983 Impermeable sintered metal materials and hardmetals—determination of density
GB/T 3850-2015 Impermeable sintered metal materials and hardmetals—Determination of density
GB/T 4193-1984 Method for measuring the density of the fine wire and ribbon of tungsten and molybdenum used in electric light sources and vacuumtubes
GB/T 4324.1-2012 Methods for chemical analysis of tungsten—Part 1:Determination of lead content—Flame atomic absorption spectrometry
GB/T 4324.1-1984 Methods for chemical analysis of tungsten--The square wave polarographic method for the successive determination of lead and cadmium contents
GB/T 4324.2-2012 Methods for chemical analysis of tungsten—Part 2:Determination of bismuth content—Hydrogenate atomic absorption spectrometry
GB/T 4324.2-2023 Methods for chemical analysis of tungsten—Part 2:Determination of bismuth and arsenic contents
GB/T 4324.2-1984 Methods for chemical analysis of tungsten--The potassium iodide-brucine photometric method for thedetermination of bismuth content
GB/T 4324.3-2012 Methods for chemical analysis of tungsten—Part 3:Determination of tin content—Hydrogenate atomic absorption spectrometry
GB/T 4324.3-1984 Methods forchemical analysis of tungsten--The polyethylene glycol octyl phenylether-phenylfluorone photometric method for the determination of tin content
GB/T 4324.4-2012 Methods for chemical analysis of tungsten—Part 4:Determination of antimony content—Hydrogenate atomic absorption spectrometry
GB/T 4324.4-1984 Methods for chemical analysis of tungsten--The malachite green photometric method for the determination of antimony content
GB/T 4324.5-2012 Methods for chemical analysis of tungsten—Part 5:Determination of arsenic content—Hydrogenate atomic absorption spectrometry
GB/T 4324.5-1984 Methods for chemical analysis of tungsten--The molybdenum blue photometric method for the determination of arsenic content
GB/T 4324.6-2012 Methods for chemical analysis of tungsten—Part 6:Determination of iron content—1,10-phenanthroline spectrophotometry
GB/T 4324.6-1984 Methods for chemical analysisof tungsten--The ortho-phenanthroline photometric method for the determination iron content
GB/T 4324.7-2012 Methods for chemical analysis of tungsten—Part 7:Determination of cobalt content—Inductively coupled plasma atomic emission spectrometry
GB/T 4324.7-1984 Methods for chemical analysis of tungsten--The 5-Cl-PADAB photometric method for the determination of cobalt content
GB/T 4324.8-2008 Methods for chemical analysis of tungsten—Determination of nickel content—The inductively coupled plasma atomic emission spectrometry、flame atomic absorption spectrometry and dimethylglyoxime gravimetry
GB/T 4324.9-2012 Methods for chemical analysis of tungsten—Part 9:Determination of cadmium content—Inductively-coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry
GB/T 4324.10-2012 Methods for chemical analysis of tungsten—Part 10:Determination of copper content—Flame atomic absorption spectrometry
GB/T 4324.10-1984 Methods for chemical analysis of tungsten--The neocuproine photometric method for the determination of copper content
GB/T 4324.11-2012 Methods for chemical analysis of tungsten—Part 11:Determination of aluminum content—Inductively coupled plasma atomic emission spectrometry
GB/T 4324.11-1984 Methods for chemical analysis oftungsten--The chromazurol S photometric method for the determination of aluminium content
GB/T 4324.12-2012 Methods for chemical analysis of tungsten—Part 12:Determination of silicon content—Chlorization-molybdenum blue spectrophotometry
GB/T 4324.12-1984 Methods for chemical analysisof tungsten--The chlorization-molybdenum blue photometric method for the determination of silicon content
GB/T 4324.13-2008 Methods for chemical analysis of tungsten—Determination of calcium content—The inductively coupled plasma atomic emission spectrometry
GB/T 4324.14-2012 Methods for chemical analysis of tungsten—Part 14:Determination of residue content after chloride volatility—Gravimetric method
GB/T 4324.15-2008 Methods for chemical analysis of tungsten—Determination of magnesium content—The flame atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry
GB/T 4324.16-2012 Methods for chemical analysis of tungsten—Part 16:Determination of loss content on ignition—Gravimetric method
GB/T 4324.17-2012 Methods for chemical analysis of tungsten—Part 17:Determination of sodium content—Flame atomic absorption spectrometry
GB/T 4324.17-1984 Methods for chemical analysis of tungsten--The atomic absorption spectrophotometric method for the determination of sodium content
GB/T 4324.18-2012 Methods for chemical analysis of tungsten—Part 18:Determination of potassium content—Flame atomic absorption spectrometry
GB/T 4324.18-1984 Methods for chemical analysis of tungsten--The atomic absorption spectrophotometric method for the determination of potassium content
GB/T 4324.19-2012 Methods for chemical analysis of tungsten—Part 19:Determination of titanium content—The diantipyrylmethane photometric spectrophtometry
GB/T 4324.19-1984 Methods for chemical analysis of tungsten--The diantipyrylmethane photometric method for the determination of titanium content
GB/T 4324.20-2012 Methods for chemical analysis of tungsten—Part 20:Determination of vanadium content—Inductively coupled plasma atomic emission spectrometry
GB/T 4324.20-1984 Methods for chemical analysis of tungsten—The N-benzoyl-N-phenylhydroxylamine photometric method for the determination of vanadium content
GB/T 4324.21-2012 Methods for chemical analysis of tungsten—Part 21:Determination of chromium content—Inductively coupled plasma atomic emission spectrometry
GB/T 4324.21-1984 Methods for chemical analysis of tungsten--The diphenylcarbazide photometric method for the determination of chromium content
GB/T 4324.22-2012 Methods for chemical analysis of tungsten—Part 22:Determination of manganese content—Inductively coupled plasma atomic emission spectrometry
GB/T 4324.22-1984 Methods for chemical analysisof tungsten--The formaldoxime photometric method for manganese content
GB/T 4324.23-2012 Methods for chemical analysis of tungsten—Part 23:Determination of sulfur content—The combustion-conductometric titration and high frequency combustion-infrared absorption method
GB/T 4324.23-1984 Methods for chemical analysis of tungsten--The combustion-conductometric titration method for the determination of suphur content
GB/T 4324.24-2012 Methods for chemical analysis of tungsten—Part 24:Determination of phosphorus content—Molybdemum blue photometry
GB/T 4324.24-1984 Methods for chemical analysis of tungsten--The berylium as carrier precipitation agent-molybdenum blue photometric method for the determination of phosphorus content
GB/T 4324.25-2012 Methods for chemical analysis of tungsten—Part 25:Determination of oxygen content—Pulse heating inert gas fusion-infrared absorption method
GB/T 4324.25-1984 Methods for chemical analysis of tungsten--The inert gas fusion-coulometric titration method for the determination of oxygen content
GB/T 4324.26-2012 Methods for chemical analysis of tungsten—Part 26:Determination of nitrogen content—Pulse heating inert gas fusion-thermal conductive method and the Nessler reagent spectrophotometry
GB/T 4324.26-1984 Methods for chemical analysis of tungsten--The Nessler reagent photometric method for the determination of nitrogen content
GB/T 4324.27-2012 Methods for chemical analysis of tungsten—Part 27:Determination of carbon content—High frequency combustion-infrared absorption method
GB/T 4324.27-1984 Methods for chemical analysisof tungsten--The combustion-coulometric titration method for the determinationof carbon content
GB/T 4324.28-2012 Methods for chemical analysis of tungsten—Part 28:Determination of molybdenum content—The thioyanate spectrophotometry
GB/T 4324.28-1984 Methods for chemical analysis of tungsten--The thiocy anate photometric method for the determin-ation of molybdenum content
GB/T 4324.29-1984 Methods for chemical analysis of tungsten--The gravimetric method for the determination of residue content after chloride volatility
GB/T 4324.30-1984 Methods for chemical analysis of tungsten--The gravimetric method for the determination of loss content on ignition
Related Standards
GB/T 17168-1997
Replaced
GB/T 17168-1997 Dental casting precious metal alloys
GB/T 4062-1998
Replaced
GB/T 4062-1998 Antimony trioxide
GB/T 13560-2000
Replaced
GB/T 13560-2000 Materials for sintered neodymium iron boron permanent magnets
GB/T 18113-2000
Replaced
GB/T 18113-2000 Heating element of lanthanum chromite in high temperature
GB/T 9967-2001
Replaced