T/GDWCA 0010-2018 Abolished Group standards

T/GDWCA 0010-2018 USB 2.0 interface converter cable

Publish Date: 2018-01-31 Implement Date: 2018-02-28 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Price: $ 20.00

Out of stock

Basic Information

Standard Code: T/GDWCA 0010-2018

Standard Type: Group standards

Standard Status: Abolished

is_force_gb: no

CCS Name: Cables and their accessories

ICS Name: Plug and socket devices, connectors

Publish Date: 2018-01-31

Implement Date: 2018-02-28

Scope

Scope: This standard specifies the product classification, requirements, test methods, inspection rules, marking, packaging, transportation, and storage of USB 2.0 interface conversion cables. This standard applies to conversion cables that convert USB 2.0 interfaces to serial or parallel ports. Main technical content: I. Electrical characteristics 1. The conduction impedance of each wire in the product shall not exceed 10Ω. There shall be no short-circuit phenomenon between the non-conductive terminals. 2. The insulation resistance of the product shall not be less than 1MΩ. 3. The product shall withstand 100V DC for 60 seconds without discharge, breakdown, or arcing, and the product shall not be damaged. 4. The leakage current shall not exceed 1.0mA, etc. II. Mechanical characteristics 1. The force required to fully insert the USB interface shall not exceed 35N. 2. The force required to fully disconnect the USB interface shall not be less than 10N, etc.

Development Information

Related Standards

GB/T 12272-1990 Active

GB/T 12272-1990 Measuring method of radio-frequency high potential withstanding voltage for radio-frequency coaxial connectors

Publish Date: 1990-02-09

GB/T 15157-1994 Active

GB/T 15157-1994 Connectors for frequencies below 3MHz for use with printed boards Part l:Generic specification—General requirements and guide for the preparation of detail specifications, with assessed quality

Publish Date: 1994-07-26

GB/T 15176-1994 Active

GB/T 15176-1994 Generic specification for sockets and accessories for electronic plug-in devices

Publish Date: 1994-08-20

GB/T 15872-1995 Replaced

GB/T 15872-1995 Power supply interface for semiconductor equipment

Publish Date: 1995-12-22

GB/T 15873-1995 Active

GB/T 15873-1995 Directives for drafting semiconductor facilities interface specification

Publish Date: 1995-12-22

GB/T 11313-1996 Replaced

GB/T 11313-1996 Redio-frequency connectors—Part 1:Generic specification—General requirements and measuring methods

Publish Date: 1996-11-12