GB/T 18244-2000
Replaced
GB/T 328.11-2007
Active
National standards
GB/T 328.11-2007 Test methods for building sheets for waterproofing—Part 11:Bitumen sheets for waterproofing-flow resistance at elevated temperature
GB/T 328.11-2007 Test methods for building sheets for waterproofing—Part 11:Bitumen sheets for waterproofing-flow resistance at elevated temperature
Basic Information
Standard Code:
GB/T 328.11-2007
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Roofing and paving waterproofing and moistureproof materials
ICS Name:
Waterproof
Publish Date:
2007-03-26
Implement Date:
2007-10-01
Pages:
9 pages
Scope
This part of GB/T 328 specifies the determination of the anti-flowability of asphalt roofing waterproofing membranes when the temperature rises, and the heat resistance limit of the upper and lower surfaces of the test membranes at a specified temperature or continuously measured at different temperatures. The test is used to verify the heat resistance requirements of the product, or to determine the heat resistance limit of the specified product, such as measuring the changes in performance after aging. This method is not suitable for asphalt membranes without a reinforcing layer.
Development Information
Same series standard
GB/T 328.1-2007 Test methods for building sheets for waterproofing—Part 1:Bitumen,plastic and rubber sheets for waterproofing-rules for sampling
GB/T 328.2-2007 Test methods for building sheets for waterproofing—Part 2:Bitumen sheets for waterproofing-visible defects
GB/T 328.3-2007 Test methods for building sheets for waterproofing—Part 3:Plastic and rubber sheets for waterproofing-visible defects
GB/T 328.4-2007 Test methods for building sheets for waterproofing—Part 4:Bitumen sheets for waterproofing-thickness and mass per unit area
GB/T 328.5-2007 Test methods for building sheets for waterproofing—Part 5:Plastic and rubber sheets for waterproofing-thickness and mass per unit area
GB/T 328.6-2007 Test methods for building sheets for waterproofing—Part 6:Bitumen sheets for waterproofing-length, width and straightness
GB/T 328.7-2007 Test methods for building sheets for waterproofing—Part 7:Plastic and rubber sheets for waterproofing-length, width, straightness and flatness
GB/T 328.8-2007 Test methods for building sheets for waterproofing—Part 8:Bitumen sheets for waterproofing-tensile properties
GB/T 328.9-2007 Test methods for building sheets for waterproofing—Part 9:Plastic and rubber sheets for waterproofing-tensile properties
GB/T 328.10-2007 Test methods for building sheets for waterproofing—Part 10:Bitumen,plastic and rubber sheets for waterproofing-watertightness
GB/T 328.12-2007 Test methods for building sheets for waterproofing—Part 12:Bitumen sheets for waterproofing-dimensional stability
GB/T 328.13-2007 Test methods for building sheets for waterproofing—Part 13:Plastic and rubber sheets for waterproofing-dimensional stability
GB/T 328.14-2007 Test methods for building sheets for waterproofing—Part 14:Bitumen sheets for waterproofing-flexibility at low temperature
GB/T 328.15-2007 Test methods for building sheets for waterproof—Part 15:Plastic and rubber sheets for waterproof-foldability at low temperature
GB/T 328.16-2007 Test methods for building sheets for waterproofing—Part 16:Plastic and rubber sheets for waterproofing-exposure to liquid chemicals including water
GB/T 328.17-2007 Test methods for building sheets for waterproofing—Part 17:Bitumen sheets for waterproofing-adhesion of granules
GB/T 328.18-2007 Test methods for building sheets for waterproofing—Part 18:Bitumen sheets for waterproofing-resistance to tearing(nail shank)
GB/T 328.19-2007 Test methods for building sheets for waterproofing—Part 19:Plastic and rubber sheets for waterproofing-resistance to tearing
GB/T 328.20-2007 Test methods for building sheets for waterproofing—Part 20:Bitumen sheets for waterproofing-resistance to peeling of joints
GB/T 328.21-2007 Test methods for building sheets for waterproofing—Part 21:Plastic and rubber sheets for waterproofing-resistance to peeling of joints
GB/T 328.22-2007 Test methods for building sheets for waterproofing—Part 22:Bitumen sheets for waterproofing-resistance to shearing of joints
GB/T 328.23-2007 Test methods for building sheets for waterproofing—Part 23:Plastic and rubber sheets for waterproofing-resistance to shearing of joints
GB/T 328.24-2007 Test methods for building sheets for waterproofing—Part 24:Bitumen,plastic and rubber sheets for waterproofing-resistance to impact
GB/T 328.25-2007 Test methods for building sheets for waterproofing—Part 25:Bitumen,plastic and rubber sheets for waterproofing-resistance to static loading
GB/T 328.26-2007 Test methods for building sheets for waterproofing—Part 26:Bitumen sheets for waterproofing-dissoulble composite of membrane(impregnated and coated asphalt amount)
GB/T 328.27-2007 Test methods for building sheets for waterproofing—Part 27:Bitumen,plastic and rubber sheets for waterproofing-water absorption
Replace the following standards
Referenced Standards
GB/T 328.1-1989 Test methods for asphalt waterproof roll roofing—The general rules
GB/T 328.1-2007 Test methods for building sheets for waterproofing—Part 1:Bitumen,plastic and rubber sheets for waterproofing-rules for sampling
GB/T 6379.2-2004 Accuracy(trueness and precision)of measurement methods and results—Part 2:Basic method for the determination of repeatability and reproducibility of a standard measurement method
Adopt standards
EN1110:1999
Related Standards
GB/T 19889.7-2005
Replaced
GB/T 19889.7-2005 Acoustics—Measurement of sound insulation in buildings and of building elements—Part 7:Field measurements of impact sound insulation of floors
GB/T 19889.1-2005
Active
GB/T 19889.1-2005 Acoustics—Measurement of sound insulation in buildings and of building elements—Part 1:Requirements for laboratory test facilities with suppressed flanking transmission
GB/T 19889.2-2005
Abolished
GB/T 19889.2-2005 Acoustics—Measurement of sound insulation in buildings and of building elements—Part 2:Determination,verification and application of precision data
GB/T 19889.3-2005
Replaced
GB/T 19889.3-2005 Acoustics—Measurement of sound insulation in buildings and of building elements—Part 3:Laboratory measurements of airborne sound insulation of building elements
GB/T 19889.4-2005
Active