T/LBIA 010-2024 Bamboo Sword Rack

Scope

Main Technical Content: 4.1 Raw Material Requirements The quality of solvent-based wood coatings used in production shall comply with the requirements of GB 18581. 4.2 Appearance and Structural Requirements The appearance and structure of bamboo knife racks shall comply with the provisions of Table 1. Table 1: Appearance Quality Requirements for Bamboo Knife Racks Item Inspection Item Requirements Classification Basic General 1 No through cracks 2 No insect holes or marks on the surface 3 No mold on the surface 4 No rot on the surface 5 No cracks on the surface 6 No obvious color differences on the surface 7 No chipped edges or board edge damage on the surface 8 No glue joint gaps or indentations between adjacent bamboo pieces or bundles on the surface 9 No glue lines on the surface formed by excessive glue concentration in the glue layer 10 No exposed bamboo spines or protruding bamboo fibers on the surface 11 No obvious scratches, indentations, or contamination on the surface 12 No bubbling, delamination, or debonding on the surface 4.3 Main Dimensions and Tolerances When designing the product, on the basis of satisfying the shape structure, artistic design, and product decoration, the main dimensions shall refer to Table 2. Special size requirements shall be implemented according to the agreement between the contracting parties. Table 2: Dimensions and Tolerances of Bamboo Knife Racks Unit: mm Item Dimension Tolerance Range Specifications (length × height × width) 100 × 218 × 75 ±10 × ±9 × ±2 Note: Special size requirements shall be agreed upon by the supplier and the buyer and the dimension deviations shall be specified in the contract. 4.4 Moisture Content of Bamboo for Bamboo Knife Racks The bamboo used for bamboo knife racks shall be subject to drying treatment, and the moisture content of the bamboo shall be 6% ~ (the annual average wood balance moisture content

Development Information

Related Standards