GB/T 14041.1-2007 Active National standards

GB/T 14041.1-2007 Hydraulic fluid power—Filter elements—Part 1:Verification of fabrication integrity and determination of the first bubble point

Publish Date: 2007-04-18 Implement Date: 2007-11-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 14041.1-2007

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Hydraulic and pneumatic devices

ICS Name: Filter, sealing gasket, and fluid impurities

Publish Date: 2007-04-18

Implement Date: 2007-11-01

Pages: 7 pages

Scope

This part of GB/T 14041 specifies a test method for verifying the structural integrity of filter elements and determining the maximum pore size position of the filter material using the bubble point test. This part of GB/T 14041 is applicable to filter elements used in hydraulic transmission systems. The structural integrity verification is used to determine the acceptability of the filter element for subsequent use or testing. Through continuous structural integrity tests, the initial bubble point can be determined, but the test results cannot be used to infer the performance of the filter element, such as its filtration ratio, filtration efficiency, or contaminant retention capacity.

Development Information

Word Count: 11 Thousand words Pages: 7 pages

Same series standard

GB/T 14041.2-2007 Hydraulic fluid power—Filter elements—Part 2:Verification of material compatibility with fluids

Replace the following standards

GB/T 14041.1-1993 Hydraulic fluid power—Filter elements—Verification of fabrication integrity

Referenced Standards

GB/T 6541-1986 Petroleum products—Mineral oils—Determination of interfacial tension of oil against water—Ring method GB/T 17446-1998 Fluid power systems and components—Vocabulary GB/T 17446-2012 Fluid power systems and components—Vocabulary GB/T 17446-2024 Fluid power systems and components—Vocabulary

Adopt standards

ISO 2942:2004

Related Standards

GB/T 17486-1998 Replaced

GB/T 17486-1998 Hydraulic fluid power—Filter—Evaluation of pressure drop versus flow characteristics

Publish Date: 1998-09-02

GB/T 14039-2002 Active

GB/T 14039-2002 Hydraulic fluid power—Fluids—Method for coding the level of contamination by solid particles

Publish Date: 2002-10-11

GB/T 18853-2002 Replaced

GB/T 18853-2002 Hydraulic fluid power filters—Multi-pass method for evaluating filtration performance of a filter element

Publish Date: 2002-10-11

GB/T 18854-2002 Replaced

GB/T 18854-2002 Hydraulic fluid power—Calibration of liquid automatic particle counters

Publish Date: 2002-10-11

GB/T 3452.1-2005 Active

GB/T 3452.1-2005 Fluid power systems—O-rings—Part 1:Inside diameters, cross-sections, tolerances and size identification code

Publish Date: 2005-07-11

GB/T 20082-2006 Active

GB/T 20082-2006 Hydraulic fluid power—Fluid contamination—Determination of particulate contamination by the counting method using an optical microscope

Publish Date: 2006-01-23