T/SDCEAS 30011-2023 Hollow extrusion molding fiber reinforced cement board curtain wall engineering construction structure

Scope

Scope: This collection of drawings is applicable to decorative hollow extruded board curtain wall projects of new, renovated, and expanded industrial and civil buildings with an earthquake resistance design intensity of no more than 8 degrees and a height of less than 100m, and the design service life should be no less than 25 years. Main technical content: 1. The main content of this collection of drawings is the building construction methods for closed-seam curtain wall projects using hollow extruded fiber-reinforced cement boards (referred to as hollow extruded boards). Open-seam curtain wall projects can refer to this collection of drawings, but reliable waterproofing and drainage systems should be set up, and waterproof protection measures should be adopted on the outer side of the insulation layer of the main exterior wall. 2. The angle steel connectors, Z-type connectors, supporting angle steel, internal threaded backplates, and fastening bolts for Z-type connectors in the hollow extruded board curtain wall system are all standard accessories. If non-standard accessories are used, they should only be adopted after meeting the requirements through calculation. 3. The embedded parts, anchor bolts, rear-mounted embedded plates, angle steel cantilever pieces, connecting bolts, curtain wall columns, and curtain wall beams in the hollow extruded board curtain wall system should be calculated and determined according to the actual situation of the project.

Development Information

Related Standards