GB/T 16400-2003
Replaced
T/JCS 06-2021
Active
Group standards
T/JCS 06-2021 Ecological Lightweight Partitioning Slab for Construction made from Straw Bales
T/JCS 06-2021 Ecological Lightweight Partitioning Slab for Construction made from Straw Bales
Price:
$ 20.00
Basic Information
Standard Code:
T/JCS 06-2021
Standard Type:
Group standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Wall materials
ICS Name:
Soundproofing and heat insulation materials
Publish Date:
2021-10-26
Implement Date:
2021-11-01
Scope
Scope: This document specifies the terms and definitions, classification and marking, technical requirements, test methods, inspection rules, and marking, transportation, and storage of straw eco-lightweight partition boards for building applications. This document applies to straw eco-lightweight partition boards for industrial and civil buildings, which are made by using crushed and modified agricultural straw as fiber materials (with a mass fraction of straw plant fibers not less than 10%), fly ash as mineral admixtures, and low-grade diatomite as functional fillers, and are bonded with inorganic cementitious materials. Main technical contents: Manufacturers shall conduct quality inspections on the straw plant fibers used in the production of straw eco-lightweight partition boards and regularly re-inspect the performance of the main raw materials. The cementitious materials, fly ash, diatomite, and water used in the production of straw eco-lightweight partition boards shall comply with the relevant provisions of corresponding national and industry standards. The moisture content of straw plant fibers shall not exceed 15%, and the sand content shall comply with the requirements of GB/T 17431.1. The straw shall not be moldy. The weight proportion of straw in straw eco-lightweight partition boards shall not be less than 10%. General Portland cement shall comply with the provisions of GB 175. Aluminate cement shall comply with the provisions of JC 714. Magnesium cementitious materials shall comply with the provisions of JC/T 449. The appearance quality of straw eco-lightweight partition boards shall comply with the requirements of Table 2. Table 2 Appearance Quality Items (mm) Indicators 1 Transverse, longitudinal, and thickness-directional through cracks in the board None 2 Surface cracks on the board, with a length of 50–100 mm and a width of 0.5–1.0 mm ≤ 2 per board 3 Chipped edges and corners, with a width × length of 10 × 25–20 × 30 mm ≤ 2 per board 4 Concave
Development Information
Related Standards
JG 158-2004
Active
JG 158-2004 External thermal insulating rendering systems made of mortar with mineral binder and using expanded polystyrene granule as aggregate
GB/T 19687-2005
Active
GB/T 19687-2005 Determination of the long-term change in thermal resistance of closed-cell plastics(accelerated laboratory test methods)
GB/T 23615.1-2009
Replaced
GB/T 23615.1-2009 Accessorial material for architectural aluminum alloy profiles—Part 1:Thermal barrier strip of polyamide
JG/T 283-2010
Active
JG/T 283-2010 Light weight mortar mixed with expanded and vitrified beads as aggregates
GB/T 25975-2010
Replaced