GB/T 23615.1-2009 Replaced National standards

GB/T 23615.1-2009 Accessorial material for architectural aluminum alloy profiles—Part 1:Thermal barrier strip of polyamide

Publish Date: 2009-04-15 Implement Date: 2010-02-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 23615.1-2009

Standard Type: National standards

Standard Status: Replaced

is_force_gb: no

CCS Name: Metallurgical raw materials and auxiliary materials

ICS Name: Soundproofing and heat insulation materials

Publish Date: 2009-04-15

Implement Date: 2010-02-01

Pages: 15 pages

Scope

This part of GB/T 23615 specifies the requirements, test methods, inspection rules, and marking, packaging, transportation, storage, and contract (or order form) content for heat insulation strips used in aluminum alloy building profiles.
This part is applicable to polyamide heat insulation strips used in aluminum alloy building profiles, which are extruded from polyamide materials (hereinafter referred to as heat insulation strips). Other types of heat insulation strips can refer to and adopt this part for implementation.

Development Information

Word Count: 28 Thousand words Pages: 15 pages

Superseded by the following standards

GB/T 23615.1-2017 Thermal barrier materials for architecture aluminium alloy extruded profiles—Part 1:Polyamide profiles

Referenced Standards

GB/T 1033-1986 Test method for density and relative density of plastics GB/T 1633-2000 Plastics—Thermoplastic materials—Determination of Vicat softening temperature(VST) GB/T 1634.2-2004 Plastics—Determination of temperature of deflection under load—Part 2:Plastics,ebonite and long-fibre-reinforced composites GB/T 9345.1-2008 Plastics—Determination of ash—Part 1:General methods GB/T 1036-1989 Determination for coefficient of linear expansion of plastics GB/T 1036-2008 Test method for coefficient of linear thermal expansion of plastics between-30 ℃ and 30 ℃ with a vitreous silica dilatometer GB/T 1040.1-2006 Plastics—Determination of tensile properties—Part 1:General principles GB/T 1040.1-2018 Plastics—Determination of tensile properties—Part 1:General principles GB/T 1043.1-2008 Plastics—Determination of charpy impact properties—Part 1:Non-instrumented impact test GB/T 2411-1980 Plastics—Shore hardness test GB/T 2411-2008 Plastics and ebonite—Determination of indentation hardness by means of a durometer(shore hardness) GB 5237.1-2004 Wrought aluminium alloy extruded profiles for architecture—Part 1:Untreated profiles GB/T 5237.1-2008 Aluminium alloy extruded profiles for architecture—Part 1:Mill finish profiles GB/T 5237.1-2017 Aluminium alloy extruded profiles for architecture—Part 1:Mill finish profiles GB/T 6682-1992 Water for analytical laboratory use—Specification and test methods GB/T 6682-2008 Water for analytical laboratory use—Specification and test methods GB/T 1040.1-2025 Plastics—Determination of tensile properties—Part 1:General principles

Related Standards

GB/T 16400-2003 Replaced

GB/T 16400-2003 Aluminium silicate wool and it's products for thermal insulation

Publish Date: 2003-07-23

JG 158-2004 Active

JG 158-2004 External thermal insulating rendering systems made of mortar with mineral binder and using expanded polystyrene granule as aggregate

Publish Date: 2004-08-18

GB/T 19687-2005 Active

GB/T 19687-2005 Determination of the long-term change in thermal resistance of closed-cell plastics(accelerated laboratory test methods)

Publish Date: 2005-03-17

JG/T 283-2010 Active

JG/T 283-2010 Light weight mortar mixed with expanded and vitrified beads as aggregates

Publish Date: 2010-07-29

GB/T 25975-2010 Replaced

GB/T 25975-2010 Rock wool products for exterior insulation and finish systems(EIFS)

Publish Date: 2011-01-10

GB/T 25996-2010 Replaced

GB/T 25996-2010 Test method for thermal insulations on external stress corrosion cracking of austenitic stainless steel

Publish Date: 2011-01-10