GB 11920-1989
Replaced
GB/T 30547-2023
Active
National standards
GB/T 30547-2023 Filter resistor for high voltage direct current (HVDC) transmission system
GB/T 30547-2023 Filter resistor for high voltage direct current (HVDC) transmission system
Price:
$ 84
Basic Information
Standard Code:
GB/T 30547-2023
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Control appliances
ICS Name:
Control equipment for power systems
Publish Date:
2023-11-27
Implement Date:
2024-06-01
Pages:
26 pages
Scope
This document specifies the usage conditions, technical parameters, design and structure, type testing, factory testing, on-site testing, packaging, storage and transportation, installation, operation, maintenance, and technical data for resistors used in filters for high-voltage direct current (HVDC) transmission systems. This document applies to AC filters and DC filters used in HVDC transmission systems with voltages of ±1,100 kV and below.
Development Information
Replace the following standards
Referenced Standards
GB/T 311.1-2012 Insulation co-ordination—Part 1:Definitions,principles and rules
GB/T 4208-2017 Degrees of protection provided by enclosure(IP code)
GB/T 11022-2020 Common specifications for high-voltage alternating-current switchgear and controlgear standards
GB/T 11604-2015 Testing procedure of radio interference generated by high voltage equipment
GB/T 13540-2009 Seismic qualification for high-voltage switchgear and controlgear
GB/T 16927.1-2011 High-voltage test techniques—Part 1:General definitions and test requirements
GB/T 26218.1-2010 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions—Part 1:Definitions,information and general principles
GB/T 12944-2011 High-voltage ceramic wall bushings
GB/T 12944.1-1991 High-voltage ceramic wall bushings—Technical specifications
GB/T 12944.2-1991 High-voltage ceramic wall bushings Dimensions and characteristics
GB/T 25096-2010 Composite station post insulators for substations with AC voltages greater than 1 000 V—Definitions,test methods and acceptance riteria
GB/T 26218.2-2010 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions—Part 2:Ceramic and glass insulators for a.c.systems
GB 50260-2013 Code for seismic design of electrical installations
Related Standards
GB/T 16435.1-1996
Active
GB/T 16435.1-1996 Telecontrol equipment and systems interfaces (electrical characteristics)
GB/T 16436.1-1996
Active
GB/T 16436.1-1996 Telecontrol equipment and systems—Part 1:General considerations—Section 2 :Guide for specifications
GB/T 15149.1-2002
Active
GB/T 15149.1-2002 Teleprotection equipment of power systems—Performance and testing—Part 1:Command systems
GB/T 13729-2002
Replaced
GB/T 13729-2002 Remote terminal unit equipment
GB/T 4205-2003
Replaced