GB/T 20042.1-2005
Replaced
T/CI 090-2023
Active
Group standards
T/CI 090-2023 Method for performance testing of a fuel cell system ejector
T/CI 090-2023 Method for performance testing of a fuel cell system ejector
Price:
$ 20.00
Basic Information
Standard Code:
T/CI 090-2023
Standard Type:
Group standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Power supply
ICS Name:
Fuel cell
Publish Date:
2023-07-06
Implement Date:
2023-07-06
Pages:
11 pages
Scope
Scope: This document specifies the requirements for test equipment and instruments, test conditions, and test methods for hydrogen injectors used in fuel cell systems (hereinafter referred to as injectors). This document is applicable to the testing of hydrogen injectors used in fuel cell systems. Main technical content: - Samples must pass the factory/line-off testing before performance testing can be conducted. - The injectors should be free from obvious scratches, deformations, or other defects. - The nameplates and markings should be installed correctly and firmly, with clear writing. - The components should be securely fastened, free from rust, burrs, cracks, or other defects or damage, and visually free from obvious cosmetic damage or impurities. - Test environment: - Temperature of the test area: 5°C to 45°C. - The hydrogen-related test areas should comply with the relevant provisions of GB/T 29729-2022.
Development Information
Related Standards
GB/T 20042.2-2008
Replaced
GB/T 20042.2-2008 Proton exchange membrane fuel cell—General technical specification of fuel cell stacks
GB/Z 21742-2008
Active
GB/Z 21742-2008 Portable proton exchange membrane fuel cell power systems
GB/Z 21743-2008
Abolished
GB/Z 21743-2008 Stationary proton exchange membrane fuel cell power system (separate)—Tests methods for the performance
GB/T 20042.3-2009
Replaced
GB/T 20042.3-2009 Proton exchange membrane fuel cell—Part 3:Test method for proton exchange membrane
GB/T 20042.4-2009
Replaced