T/ACEF 205-2025 Active Group standards

T/ACEF 205-2025: Recycling and reuse of dismantled products from discarded electrical and electronic equipment, including refrigerants

T/ACEF 205-2025 Recycling and reuse of waste electronic products and refrigerants

Publish Date: 2025-06-06 Implement Date: 2025-07-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Price: $ 20.00

Out of stock

Basic Information

Standard Code: T/ACEF 205-2025

Standard Type: Group standards

Standard Status: Active

is_force_gb: no

CCS Name: Technical management

ICS Name: Waste disposal and treatment equipment and devices

Publish Date: 2025-06-06

Implement Date: 2025-07-01

Scope

Scope: This document stipulates the general requirements for the recycling and reuse of refrigerants from the dismantled products of waste electrical and electronic equipment, including recovery requirements, regeneration requirements, environmental protection, and safety precautions. This document applies to the recycling and reuse of refrigerants from the dismantled products of waste electrical and electronic equipment. Main technical content: 4.1 The refrigerant recovery and recycling operations of recycling enterprises shall comply with the "Guidelines for Standardized Dismantling and Processing of Waste Electrical and Electronic Equipment", the "Regulations on the Management of Substances that Deplete the Ozone Layer", and the management regulations of the ecological environment management departments and emergency management departments regarding relevant refrigerants. 4.2 The recovered refrigerants shall be classified, stored, and disposed of, and clearly marked on the containers. 6.3.1 The recovered refrigerants shall comply with the following requirements: a) The recovered refrigerants shall be inspected when entering the processing plant; b) Operators shall weigh and check whether the refrigerants in the gas cylinders are overfilled. If overfilled, they must be promptly discharged to other empty gas cylinders and not be discharged into the atmosphere at will; c) The safety status of the packaging gas cylinders shall be checked, with TSG 23 as the reference standard. If there are safety issues, the gas cylinders shall be rejected or handled promptly; d) Samples shall be taken to test the refrigerant and determine the refrigerant model. 6.3.2 Regeneration processing operations a) Use dedicated equipment to initially remove oil, water, non-condensable gases, and other impurities from the refrigerants and store them in dedicated containers. The storage of the containers shall comply with the corresponding requirements, where the gas cylinders shall comply