T/SHPTA 102-2024 Active Group standards

T/SHPTA 102-2024 The technical requirements for the inner lining of polytetrafluoroethylene storage tank

T/SHPTA 102-2024 The technical requirements for the inner lining of polytetrafluoroethylene storage tank

Publish Date: 2024-10-21 Implement Date: 2024-11-21 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Price: $ 29.00

Basic Information

Standard Code: T/SHPTA 102-2024

Standard Type: Group standards

Standard Status: Active

is_force_gb: no

CCS Name: Daily-use plastic products

ICS Name: Other rubber and plastic products

Publish Date: 2024-10-21

Implement Date: 2024-11-21

Pages: 12 pages

Scope

This document specifies the materials, manufacturing, testing methods, inspection rules, and marking, packaging, transportation, and storage of safety for PTFE-lined storage tanks (hereinafter referred to as "storage tanks").
This document is applicable to steel-lined plastic atmospheric pressure storage tanks with PTFE sheets as the inner lining layer, which are closely fitted to the inner surface of the metal shell and used in the chemical, petroleum, pharmaceutical, metallurgical, and power industries for storing various chemicals.
The temperature usage range of the PTFE storage tanks specified in this document is -29 ℃~100 ℃, and the design pressure is greater than -0.02 MPa and less than 0.1 MPa.

Development Information

Word Count: 15 Thousand words Pages: 12 pages

Referenced Standards

GB/T 1033.1-2008 Plastics—Methods for determining the density of non-cellular plastics—Part 1:Immersion method,liquid pyknometer method and titration method GB/T 1040.1-2006 Plastics—Determination of tensile properties—Part 1:General principles GB/T 1040.1-2018 Plastics—Determination of tensile properties—Part 1:General principles GB/T 1040.1-2025 Plastics—Determination of tensile properties—Part 1:General principles GB/T 7122-1996 Adhesives—Determination of peel resistance of high-strength adhesive bonds—Floating roller method GB/T 8923.1-2011 Preparation of steel substrates before application of paints and related products—Visual assessment of surface cleanliness—Part 1:Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings GB/T 23711.8-2019 Test method for pressure vessels lined with plastics—Part 8:High-resistance testing GB 50073-2013 Code for design of clean room HG/T 4089-2022 Plastic lined equipment and water pressure testing method HG/T 4089-2009 Plastic lining equipment and water pressure testing method HG/T 4090-2022 Plastic lined equipment and electric spark testing method HG 20202 NB/T 47003.1 QB/T 5257-2018 Polytetrafluoroethylene (PTFE) sheet GB/T 7122-2025 Determination of peel resistance of high-strength adhesive bonds—Floating-roller method

Related Standards

GB/T 18241.2-2000 Active

GB/T 18241.2-2000 Rubber lining—Part 2— Lining for grinding mills

Publish Date: 2000-10-27

GB/T 18241.3-2000 Replaced

GB/T 18241.3-2000 Rubber Iining—Part 3-Lining for floatation machine

Publish Date: 2000-10-27

GB 18241.1-2001 Replaced

GB 18241.1-2001 Rubber lining—Part 1 Anticorrosion lining for equipment

Publish Date: 2001-07-03

GB/T 20029-2005 Active

GB/T 20029-2005 Rubber isolation bearings for instruments and equipments

Publish Date: 2005-09-15

GB/T 18241.4-2006 Active

GB/T 18241.4-2006 Rubber lining—Part 4:Anticorrosion lining for flue gas desulfurization

Publish Date: 2006-03-14

GB 18173.1-2006 Replaced

GB 18173.1-2006 Polymer water-proof materials—Part 1:Water-proof sheet

Publish Date: 2006-08-24