GB/T 1927.13-2022 Active National standards

GB/T 1927.13-2022 Test methods for physical and mechanical properties of small clear wood specimens—Part 13:Determination of the modulus of elasticity in compression perpendicular to grain

GB/T 1927.13-2022 Test methods for physical and mechanical properties of small clear wood specimens—Part 13:Determination of the modulus of elasticity in compression perpendicular to grain

Publish Date: 2022-07-11 Implement Date: 2023-02-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Price: $ 50

Basic Information

Standard Code: GB/T 1927.13-2022

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Raw logs and original timber

ICS Name: \nTimber, logs, and sawn timber

Publish Date: 2022-07-11

Implement Date: 2023-02-01

Pages: 8 pages

Scope

This document describes the testing principles, equipment, samples, testing procedures, result calculation, and test reports for determining the transverse compressive elastic modulus of wood.
This document is applicable to the determination of the transverse compressive elastic modulus of all flawless small samples of wood in the green or air-dried state.

Development Information

Word Count: 18 Thousand words Pages: 8 pages

Same series standard

GB/T 1927.11-2022 Test methods for physical and mechanical properties of small clear wood specimens—Part 11:Determination of ultimate stress in compression parallel to grain GB/T 1927.14-2022 Test methods for physical and mechanical properties of small clear wood specimens—Part 14:Determination of tensile strength parallel to grain GB/T 1927.15-2022 Test methods for physical and mechanical properties of small clear wood specimens—Part 15:Determination of tensile strength perpendicular to grain GB/T 1927.16-2022 Test methods for physical and mechanical properties of small clear wood specimens—Part 16:Method of testing in shearing strength parallel to grain of wood GB/T 1927.21-2022 Test methods for physical and mechanical properties of small clear wood specimens—Part 21:Determination of nail and screw holding power

Replace the following standards

GB/T 1943-2009 Method for determination of the modulus of elasticity in compression perpendicular to grain of wood

Referenced Standards

GB/T 1927.2-2021 Test methods for physical and mechanical properties of small clear wood specimens—Part 2:Sampling methods and general requirements GB/T 1927.4-2021 Test methods for physical and mechanical properties of small clear wood specimens—Part 4:Determination of moisture content GB/T 1927.5-2021 Test methods for physical and mechanical properties of small clear wood specimens—Part 5: Determination of density LY/T 1788-2008 Standard terminology relating to wood properties LY/T 1788-2023 Vocabulary of wood properties

Related Standards

GB 449-1984 Replaced

GB 449-1984 Sawn timber volume table

Publish Date: 1984-12-22

GB 4814-1984 Replaced

GB 4814-1984 Log volume table

Publish Date: 1984-12-22

GB 4815-1984 Replaced

GB 4815-1984 Volume table of Chinese fir tree poles

Publish Date: 1984-12-22

GB/T 11717-1989 Replaced

GB/T 11717-1989 Pulp logs

Publish Date: 1989-11-16

GB/T 1930-1991 Replaced

GB/T 1930-1991 Method for determination of the annual rings width and latewood rate of wood

Publish Date: 1991-05-03

GB/T 15106-1994 Replaced

GB/T 15106-1994 Log of sliced veneer

Publish Date: 1994-06-27