GB 449-1984
Replaced
GB/T 1927.16-2022
Active
National standards
GB/T 1927.16-2022 Test methods for physical and mechanical properties of small clear wood specimens—Part 16:Method of testing in shearing strength parallel to grain of wood
GB/T 1927.16-2022 Test methods for physical and mechanical properties of small clear wood specimens—Part 16:Method of testing in shearing strength parallel to grain of wood
Price:
$ 50
Basic Information
Standard Code:
GB/T 1927.16-2022
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Raw logs and original timber
ICS Name:
\nTimber, logs, and sawn timber
Publish Date:
2022-07-11
Implement Date:
2023-02-01
Pages:
9 pages
Scope
This document describes the testing equipment, specimens, test procedures, and result calculations for determining the shear strength of green or air-dried wood along the grain. This document is applicable to the shear strength test of small flawless wood specimens along the grain.
Development Information
Same series standard
GB/T 1927.11-2022 Test methods for physical and mechanical properties of small clear wood specimens—Part 11:Determination of ultimate stress in compression parallel to grain
GB/T 1927.13-2022 Test methods for physical and mechanical properties of small clear wood specimens—Part 13:Determination of the modulus of elasticity in compression perpendicular to grain
GB/T 1927.14-2022 Test methods for physical and mechanical properties of small clear wood specimens—Part 14:Determination of tensile strength parallel to grain
GB/T 1927.15-2022 Test methods for physical and mechanical properties of small clear wood specimens—Part 15:Determination of tensile strength perpendicular to grain
GB/T 1927.21-2022 Test methods for physical and mechanical properties of small clear wood specimens—Part 21:Determination of nail and screw holding power
Replace the following standards
Referenced Standards
GB/T 1927.2-2021 Test methods for physical and mechanical properties of small clear wood specimens—Part 2:Sampling methods and general requirements
GB/T 1927.4-2021 Test methods for physical and mechanical properties of small clear wood specimens—Part 4:Determination of moisture content
LY/T 1788-2008 Standard terminology relating to wood properties
Adopt standards
ISO 3347:1976
Related Standards
GB 4814-1984
Replaced
GB 4814-1984 Log volume table
GB 4815-1984
Replaced
GB 4815-1984 Volume table of Chinese fir tree poles
GB/T 11717-1989
Replaced
GB/T 11717-1989 Pulp logs
GB/T 1930-1991
Replaced
GB/T 1930-1991 Method for determination of the annual rings width and latewood rate of wood
GB/T 15106-1994
Replaced