GB/T 5187-1985
Replaced
GB/T 3884.7-2025
Active
National standards
GB/T 3884.7-2025 Methods for chemical analysis of copper concentrates—Part 7:Determination of lead and zinc contents—Na2EDTA titration method
GB/T 3884.7-2025 Methods for chemical analysis of copper concentrates—Part 7:Determination of lead and zinc contents—Na2EDTA titration method
Price:
$ 54
Basic Information
Standard Code:
GB/T 3884.7-2025
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Analysis methods for heavy metals and their alloys
ICS Name:
Copper and copper alloys
Publish Date:
2025-08-29
Implement Date:
2026-03-01
Pages:
16 pages
Scope
This document describes the method of determining the lead and zinc content in copper concentrates and copper slag concentrates by the Na2EDTA titration method.
This document is applicable to the determination of lead and zinc content in copper concentrates and copper slag concentrates, with a measurement range (mass fraction): wp65.00%~20.00%; wzn2.50%~20.00%.
This document is not applicable to the determination of zinc content in copper concentrates and copper slag concentrates with a nickel mass fraction greater than 0.10% or a cobalt mass fraction greater than 0.02%.
Development Information
Same series standard
GB/T 3884.1-2025 Methods for chemical analysis of copper concentrates—Part 1:Determination of copper content—Iodine titration method and electrogravimetric method
GB/T 3884.2-2025 Methods for chemical analysis of copper concentrates—Part 2:Determination of gold and silver contents—Flame atomic absorption spectrmetric method and fire assay method
GB/T 3884.3-2025 Methods for chemical analysis of copper concentrates—Part 3:Determination of sulfur content—Gravimetric method and combustion-titration method
GB/T 3884.4-2025 Methods for chemical analysis of copper concentrates—Part 4:Determination of lead,zinc,cadmium,nickel and magnesium oxide contents—Flame atomic absorption spectrometry method
GB/T 3884.9-2025 Methods for chemical analysis of copper concentrates—Part 9:Determination of arsenic,antimony and bismuth contents
GB/T 3884.15-2025 Methods for chemical analysis of copper concentrates—Part 15:Determination of total iron and ferriferrous oxide contents
GB/T 3884.16-2025 Methods for chemical analysis of copper concentrates—Part 16:Determination of silicon dioxide content—K2SiF6 titrimetric method and gravimetric method
Replace the following standards
Referenced Standards
GB/T 3884.4-2000 Methods for chemical analysis of copper concentrates—Determination of magnesium oxide content
GB/T 3884.4-2012 Methods for chemical analysis of copper concentrates—Part 4:Determination of magnesium oxide content—Flame atomic absorption spectrophotometry method
GB/T 3884.4-2025 Methods for chemical analysis of copper concentrates—Part 4:Determination of lead,zinc,cadmium,nickel and magnesium oxide contents—Flame atomic absorption spectrometry method
GB/T 6682-1992 Water for analytical laboratory use—Specification and test methods
GB/T 6682-2008 Water for analytical laboratory use—Specification and test methods
Related Standards
GB/T 5188-1985
Replaced
GB/T 5188-1985 Brass foil
GB/T 5189-1985
Replaced
GB/T 5189-1985 Bronze foil
GB/T 6149-1985
Replaced
GB/T 6149-1985 New constantan resistance alloy
GB/T 5246-1985
Replaced
GB/T 5246-1985 Electrolytic copper powder
GB/T 8010-1987
Replaced