GB 9969.1-1998
Replaced
T/SLTSA 007-2016
Active
Group standards
T/SLTSA 007-2016 Facility Equipment Maintenance Standards
T/SLTSA 007-2016 Facility Equipment Maintenance Standards
Price:
$ 20.00
Basic Information
Standard Code:
T/SLTSA 007-2016
Standard Type:
Group standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Chemical machinery and equipment
ICS Name:
Technical product documentation
Publish Date:
2016-10-15
Implement Date:
2016-11-01
Scope
Scope: This standard specifies the scope of facility and equipment management, the funding for facility and equipment management, and the specific requirements for facility and equipment management. This standard applies to the management of facilities and equipment of all tobacco cultivation technical service cooperatives in Shilin. Main technical content: 1. For the main part of the seedling greenhouse (including metal frames, etc.), the service life shall not be less than 8 years; the service life of the pool film in the seedling greenhouse shall not be less than 1 year, the service life of the greenhouse film and shading nets shall not be less than 2 years, and the service life of the insect-proof nets shall not be less than 3 years. Within the service life, except for force majeure factors, the number of seedling greenhouse frames lost each year shall be controlled within 2% of the total number of frames. 2. Management of drying room equipment: a) Heating equipment: 1) Coal-fired furnace: There shall be no coal slag in the furnace body, no peeling or cracking of the refractory lining in the furnace body, no collapse, damage, or welding loosening of the furnace body and roof, no air leakage, and no damage to the furnace door. The surface of the furnace door, the door axle, and the door handle shall not be rusty. There shall be no rust on any wall of the furnace body (including the bottom), and the paint shall not peel off. 2) Heat exchanger: There shall be no dust accumulation in the smoke box and heat exchange tubes, and the fins of the heat exchange tubes shall be clean, with no debris clogging between the fins. There shall be no rust on the heat exchange tubes. 3) Chimney: Tightly wrap and seal the chimney cap and chimney outlet with plastic film to ensure no air leakage or rain exposure. 4) Blower: Remove the blower, pack it properly with plastic film, and store it safely. b) Automatic control equipment: Remove the aut
Development Information
Related Standards
GB/T 18617.1-2002
Active
GB/T 18617.1-2002 Technical product documentation—Organization and naming of layers for CAD—Part 1:overview and principles
GB/T 19097-2003
Active
GB/T 19097-2003 Technical product documentation—Life cycle model and allocation of documents
GB/T 21085-2007
Replaced
GB/T 21085-2007 Certificate of vehicle
GB 21518-2008
Replaced
GB 21518-2008 Minimum allowable values of energy efficiency and energy efficiency grades for AC contactors
GB/T 9969-2008
Active