GB 11118.1-1994
Replaced
MT/T 1274-2025
Active
Industry standards-Coal
MT/T 1274-2025 Anhydrous synthetic fire-resistant hydraulic fluid for coal mine
MT/T 1274-2025 Anhydrous synthetic fire-resistant hydraulic fluid for coal mine
Price:
$ 31.00
Basic Information
Standard Code:
MT/T 1274-2025
Standard Type:
Industry standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Hydraulic oil
ICS Name:
Hydraulic fluid
Publish Date:
2025-06-30
Implement Date:
2025-12-30
Pages:
16 pages
Scope
This document specifies the product classification, technical requirements, test methods, inspection rules, and marking, packaging, transportation, and storage of waterless fully synthetic flame-retardant hydraulic fluids for use in coal mines.
This document applies to waterless fully synthetic flame-retardant hydraulic fluids (hereinafter referred to as "flame-retardant hydraulic fluids") for use in coal mines.
Development Information
Referenced Standards
GB/T 260-2016 Test method for water in petroleum products—Distillation method
GB/T 265-1988 Petroleum products—Determination of kinematic viscosity and calculation of dynamic viscosity
GB/T 2541-1981 Petroleum products--Computation table for viscosity indices
GB/T 3141-1994 Industrial liquid lubricants—ISO viscosity classification
GB/T 3142-1982 Lubricants—Determination of load-carrying capacity (four balls method)
GB/T 3142-2019 Standard test method for determination of load-carrying capacity of lubricants—Four-ball method
GB/T 3536-1983 Petroleum products—Determination of flash and fire points—Cleveland open cup method
GB/T 3536-2008 Petroleum products—Determination of flash and fire points—Cleveland open cup method
GB/T 4756-1998 Petroleum liquids—Manual sampling
GB/T 4756-2015 Method for manual sampling of petroleum liquids
GB/T 5096-1985 Petroleum products—Corrosiveness to copper—Copper strip test
GB/T 5096-2017 Test method for corrosiveness to copper from petroleum products by copper strip test
GB/T 11143-1989 Inhibited mineral oil—Test method of rust preventing characteristics in the presence of water
GB/T 11143-2008 Standard test method for rust-preventing characteristics of inhibited mineral oil in the presence of water
GB/T 11143-2025 Test method for rust-preventing characteristics of inhibited mineral oil in the presence of water
GB/T 12579-2002 Determination of foaming characteristics of lubricating oils
GB/T 14832-1993 Test of compatibility between rubber material and hydraulic fluid
GB/T 14832-2008 Test methods for compatibility between hydraulic fluids and standard elastomeric materials
GB/T 37222-2018 Determination of spray flame persistence of fire-resistant fluids—Hollow-cone nozzle method
DL/T 706-2017 The determination method of autoignition point for anti-oil used in power plants according to DL/T 706-2017
DL/T 706-1999 Test method for autoignition temperature of fire-resistant fluid used for power plant
NB/SH/T 0164-2019 Rules for packaging, storage and transportation of petroleum and related products, as well as acceptance and delivery inspection
NB/SH/T 0189
NB/SH/T 0567
SH/T 0308
Adopt standards
ISO 12922:2020
Related Standards
GB/T 16898-1997
Active
GB/T 16898-1997 Guidelines for use of fire-resistant hydraulic fluids
SH/T 0644-1997
Active
SH/T 0644-1997 Aviation hydraulic oils--Test method of low temperature stability
JG/T 70-1999
Abolished
JG/T 70-1999 Microscopic Counting Method for Solid Particles and Impurities in Oil
GB 12981-2003
Replaced
GB 12981-2003 Motor vehicle brake fluids
GB/T 21449-2008
Active