Current Category: CN-DL - Electricity
This document is applicable to flexible inclinometers used to measure displacement, tilt, and deflection in hydropower, water conservancy, and other geotechnical engineering projects.
This document is applicable to the pressure gauge devices used for measuring the uplift pressure, infiltration pressure, and infiltration pressure of geotechnical bodies, as well as groundwater levels in hydraulic structures of new and renovated projects.
This document is applicable to inclinometer devices used to measure displacements perpendicular to the initial pipe axis of hydraulic structures, slope sides, and landslide bodies, etc.
This document is applicable to portable measuring instruments for measuring steel string instruments, and serves as a basis for the design, production, testing, use, maintenance, and inspection of this product.
This document is applicable to the monitoring of horizontal displacement within earth-rock dams and other geotechnical engineering projects, as well as strain gauge-type horizontal displacement meters with a single-point pipeline length of no more than 400m. For strain gauge-type horizontal displacement meters with a length exceeding 400m, a special study is required.
This document is applicable to the water-tube settlement gauge used for vertical displacement measurement in the safety monitoring of earth-rock dams and other geotechnical engineering projects.
This document is applicable to the safety monitoring of earth-rock dams. Other geotechnical engineering projects can refer to it for use as needed.
This document is applicable to the design, development, testing, acceptance, and operation and maintenance of intelligent mobile terminal applications for safety monitoring of hydropower station dams.
This document is applicable to the inspection of monitoring instruments and monitoring cables before their installation and burial in dams and other geotechnical engineering safety monitoring, as well as the periodic inspection of measuring instruments.
This document specifies the construction and acceptance requirements for new construction, expansion, and renovation of intelligent heat networks in thermal power plants, mainly including construction preparation, engineering surveying, civil engineering, pipeline installation, primary heat networks, heat stations, pressure isolation stations and relay pump stations, anti-corrosion and insulation, pressure testing, cleaning, trial operation, secondary heat networks and heat user equipment, data management, application layer, and intelligent heat network system acceptance. This document is applicable to the construction and acceptance of intelligent heat network projects in thermal power plants with a design pressure of less than or equal to 2.5MPa and a design temperature of hot water medium of less than or equal to 200℃, and steam medium with a design temperature of less than or equal to 350℃. The construction and acceptance of intelligent heat network projects in other heating systems can be implemented with reference to this document.
This regulation applies to the storage and scrapping of safety monitoring instruments for hydropower projects.
1.0.1 In order to strengthen the management of the construction quality of 110kV and above overhead transmission lines, standardize the quality control and acceptance conditions of the construction process, and ensure the quality of the project, these specifications are formulated. 1.0.2 These specifications apply to new and renovation projects of overhead transmission lines with a voltage level of 110kV and above, and do not apply to large-span overhead transmission line projects. 1.0.3 Construction shall be carried out in accordance with the design documents reviewed by the authority. If design changes are required, they shall be confirmed by the original design unit. 1.0.4 Before construction, there shall be approved construction organization design documents and supporting technical documents such as construction plans. 1.0.5 New technologies, new processes, new procedures, new equipment, and new materials shall be subject to testing, verification, and pilot validation. Only when they meet the design and these specifications requirements may they be adopted. 1.0.6 Instruments, meters, and measuring tools used for measurement and inspection shall be qualified and used within the validity period of the qualification. 1.0.7 In addition to complying with these specifications, the construction and acceptance of 110kV and above overhead transmission lines shall also comply with the provisions of the relevant national standards currently in force.