GB/T 12712-1991
Replaced
JG/T 148-2018
Active
Industry standards-The construction industry
JG/T 148-2018 Steel tube radiator
JG/T 148-2018 Steel tube radiator
Basic Information
Standard Code:
JG/T 148-2018
Standard Type:
Industry standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Heating equipment and appliances
ICS Name:
\nCentral heating system
Publish Date:
2018-05-30
Implement Date:
2018-12-01
Pages:
13 pages
Scope
This standard specifies the terms and definitions, classification and marking, materials and structure, requirements, test methods, inspection rules, marking, user manuals and certificates of conformity, packaging, transportation, and storage of steel pipe radiators (hereinafter referred to as "radiators"). This standard applies to heating systems in industrial and civil buildings, with radiators using hot water with a temperature not exceeding 95 °C and water quality meeting the requirements of GB/T 29044-2012, clause 4.5.
Development Information
Replace the following standards
JG/T 1-1999
JG/T 148-2002 Steel tube radiator
Referenced Standards
GB/T 191-2000 Packaging—Pictorial marking for handling of goods
GB/T 191-2008 Packaging—Pictorial marking for handling of goods
GB/T 700-1988 Carbon structural steels
GB/T 700-2006 Carbon structural steels
GB/T 1732-1993 Determination of impact resistance of film
GB/T 1732-2020 Determination of impact resistance of coating films
GB/T 2828.1-2003 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 2828.1-2012 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 4956-2003 Non-magnetic coatings on magnetic substrates—Measurement of coating thickness-Magnetic method
GB/T 5213-2001 Cold rolled sheets and strips for deep drawing
GB/T 5213-2008 Cold rolled low carbon steel sheet and strip
GB/T 5213-2019 Cold rolled low carbon steel sheet and strip
GB/T 7306.1-2000 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads—Part 1:Parallel internal and taper external threads
GB/T 9286-1998 Paints and varnishes—Cross cut test for films
GB/T 9286-2021 Paints and varnishes—Cross-cut test
GB/T 9969-2008 General principles for preparation of instructions for use of industrial products
GB 9969.1-1998 General principles for preparation of instructions for use of industrial products
GB/T 12467.3-1998 Quality requirements for welding—Fusion welding of metallic materials—Part 3:Standards quality requirements
GB/T 12467.3-2009 Quality requirements for fusion welding of metallic materials—Part 3:Standard quality requirements
GB/T 13754-1992 Test method of thermal output of heat emittor
GB/T 13754-2008 Test methods of thermal output of heating radiators
GB/T 13754-2017 Test methods of thermal output of heating radiators
GB/T 19866-2005 Specification and qualification of welding procedures for metallic materials—General rules
GB/T 29039-2012 Steel heating radiator
HG/T 2006-2022 Hot-melt and thermoplastic powder coatings
HG/T 2006-2006 Hot-fix powder coating
HG/T 2006-1991 Fridge using powder coating
GB/T 191-2025 Graphical symbols marking for handling and storage of packages
GB/T 4956-2025 Non-magnetic coatings on magnetic substrates—Measurement of coating thickness—Magnetic method
Related Standards
GB 4706.71-2003
Replaced
GB 4706.71-2003 Safety of household and similar electrical appliances—Particular requirements for stationary circulation pumps for heating and service installations
GB/T 13754-2008
Replaced
GB/T 13754-2008 Test methods of thermal output of heating radiators
GB 4706.71-2008
Active
GB 4706.71-2008 Household and similar electrical appliances—Safety—Particular requirements for stationary circulation pumps for heating and service water installations
JG/T 362-2012
Active
JG/T 362-2012 Heat-allocation device based on temperature determination
GB/T 29039-2012
Active