GB/T 3250-1982
Replaced
GB/T 24483-2009
Active
National standards
GB/T 24483-2009 Bauxite
GB/T 24483-2009 Bauxite
Basic Information
Standard Code:
GB/T 24483-2009
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Light metals and their alloys
ICS Name:
Aluminum and aluminum alloys
Publish Date:
2009-10-30
Implement Date:
2010-06-01
Pages:
5 pages
Scope
This standard specifies the classification, requirements, test methods, inspection rules, and marking of bauxite products, as well as their transportation, storage, and the content of purchase orders (or contracts). This standard applies to bauxite ores composed of hydrated alumina, iron oxide, and silicon oxide, which are used in the production of alumina, corundum abrasive materials, and high-alumina cement, etc.
Development Information
Referenced Standards
GB/T 2009-1987 Method of sampling and sample preparation of bauxite in bulk
YS/T 575.1-2007 Methods for chemical analysis of bauxite—Part 1:Determination of aluminium oxide content—EDTA titrimetric method
YS/T 575.2-2007 Methods for chemical analysis of bauxite—Part 2:Determination of silicon dioxide content—Gravimetric-molybdenum blue photometric method
YS/T 575.3-2007 Methods for chemical analysis of bauxite—Part 3:Determination of silicon dioxide content—Molybdenum blue photometric method
YS/T 575.4-2007 Methods for chemical analysis of bauxite—Part 4:Determination of iron oxide content—Dichromate titrimetric method
YS/T 575.5-2007 Methods for chemical analysis of bauxite—Part 5:Determination of iron oxide content—Orthophenanthroline photometric method
YS/T 575.6-2007 Methods for chemical analysis of bauxite—Part 6:Determination of titanium dioxide content—Diantipyrylmethane photometric method
YS/T 575.7-2007 Methods for chemical analysis of bauxite—Part 7:Determination of calcium oxide content—Flame atomic absorption spectrophotometric method
YS/T 575.8-2007 Methods for chemical analysis of bauxite—Part 8:Determination of magnesium oxide content—Flame atomic absorption spectorphotometric method
YS/T 575.9-2007 Methods for chemical analysis of bauxite—Part 9:Determination of potassium oxide and sodium oxide content—Flame atomic absorption spectorphotometric method
YS/T 575.10-2007 Methods for chemical analysis of bauxite—Part 10:Determination of manganese oxide content—Flame atomic absorption spectrophotometric method
YS/T 575.11-2007 Methods for chemical analysis of bauxite—Part 11:Determination of chromium oxide content—Flame atomic absorption spectrophotometric method
YS/T 575.12-2007 Methods for chemical analysis of bauxite—Part 12:Determination of vanadium pentoxide content—N-benzoy-N-phenythyroxy lamine photometric method
YS/T 575.13-2007 Methods for chemical analysis of bauxite—Part 13:Determination of zinc content—Flame atomic absorption spectrophotometric method
YS/T 575.14-2007 Methods for chemical analysis of bauxite—Part 14:Determination the total content of rare earth oxide—Tribromo-arsenazo photometric method
YS/T 575.15-2007 Methods for chemical analysis of bauxite—Part 15:Determination of gallium oxide content—Rhodamine B-extraction photometric method
YS/T 575.16-2007 Methods for chemical analysis of bauxite—Part 16:Determination of phosphorus pentoxide content—Molybdenum blue spectrophotometric method
YS/T 575.17-2007 Methods for chemical analysis of bauxite—Part 17:Determination of sulfur content—Direct combustion-iodometric method
YS/T 575.18-2007 Methods for chemical analysis of bauxite—Part 18:Determination of total carbon content—Non-aqueous titrametric method after combustion
YS/T 575.19-2007 Methods for chemical analysis of bauxite—Part 19:Determination of the loss on ignition—Gravimetric method
YS/T 575.20-2007 Methods for chemical analysis of bauxite—Part 20:Preparation of pre-dried sample
YS/T 575.21-2007 Methods for chemical analysis of bauxite—Part 21:Determination of organic carbon content—Titrimetric method
YS/T 575.22-2007 Methods for chemical analysis of bauxite—Part 22:Determination of hydroscopic moisture—Gravimetric method
YS/T 575.23-2009 Method for chemical analysis of aluminum ores—Part 23:Determination of element contents X-ray fluorescence spectrometric method
YS/T 575.24-2009 Methods for chemical analysis of aluminum ores—Part 24:Determination of carbon content and sulfur content—Infrared absorption method
YS/T 575.25-2014 Methods for chemical analysis of bauxite—Part 25:Determination of sulfur content—Coulometric titration method
YS/T 575.7-2023 Alumina chemical analysis methods - Part 7: Determination of oxide calcium content - Flame atomic absorption spectrometry
YS/T 575.14-2020 Method for chemical analysis of bauxite - Part 14: Determination of the content of rare earth oxides
YS/T 575.19-2021 The Chemical Analysis Method for Bauxite Part 19: Determination of Ash Content by Weight Method
YS/T 575.20-2021 YS/T 575.20-2021 Methods for chemical analysis of bauxite - Part 20: Preparation of pre-dried sample
YS/T 575.21-2020 Aluminium ore chemical analysis method - Part 21: Determination of organic carbon content
YS/T 575.22-2021 Alumina ore chemical analysis method - Part 22: Determination of moisture content - Weight method
YS/T 575.23-2021 Method for chemical analysis of bauxite - Part 23: Determination of element content by X-ray fluorescence spectroscopy
YS/T 575.26-2020 Alumina ore analysis method - Part 26: Determination of sulfuric acid-resistant content - Barium sulfate weight method
YS/T 575.27-2023 Method for chemical analysis of bauxite - Part 27: Determination of element content - Inductively coupled plasma atomic emission spectroscopy
YS/T 575.28-2021 Alumina ore chemical analysis method - Part 28: Determination of lithium oxide content - Flame atomic absorption spectrometry
YS/T 575.29-2023 Method for chemical analysis of bauxite - Part 29: Determination of effective Al2O3 and reactive SiO2
YS/T 575.4-2025 Method for chemical analysis of bauxite - Part 4: Determination of iron oxide content
YS/T 575.9-2025 Method for chemical analysis of bauxite - Part 9: Determination of potassium oxide and sodium oxide content - Flame atomic absorption spectrometry
Related Standards
GB/T 3251-1982
Replaced
GB/T 3251-1982 Aluminium and aluminium alloys—Compression test method for tubes
GB/T 3252-1982
Replaced
GB/T 3252-1982 Aluminium and aluminium alloys Shear test method for rivet wire and rivets
GB/T 3172-1982
Abolished
GB/T 3172-1982 Determination of adhesion ratio of aluminium powder Steel plate method
GB/T 3173-1982
Abolished
GB/T 3173-1982 Determination of coating surface of aluminium powder on water
GB/T 4438-1984
Replaced