GB/T 7673.3-2008 Active National standards

GB/T 7673.3-2008 Paper covered wires—Part 3:Paper covered rectangular copper wire

GB/T 7673.3-2008 Paper covered wires—Part 3:Paper covered rectangular copper wire

Publish Date: 2008-03-24 Implement Date: 2008-10-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 7673.3-2008

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Wire with an insulating layer

ICS Name: Wire

Publish Date: 2008-03-24

Implement Date: 2008-10-01

Pages: 10 pages

Scope

This part of GB/T 7673 specifies the requirements for paper-wrapped copper flat wires, with an insulation layer made of insulation paper wrapped in two or more layers, which is suitable for the windings of transformers and other electrical appliances.

Development Information

Word Count: 16 Thousand words Pages: 10 pages

Same series standard

GB/T 7673.1-2008 Paper covered wires—Part 1:General requirements GB/T 7673.2-2008 Paper covered wires—Part 2:Paper covered round wire GB/T 7673.4-2008 Paper covered wires—Part 4:Paper covered combined conductors GB/T 7673.5-2008 Paper covered wires—Part 5:Paper covered stranded conductors

Replace the following standards

GB/T 7673.3-1987

Referenced Standards

GB/T 7673.1-2008 Paper covered wires—Part 1:General requirements IEC 60554-1 GB/T 228-2002 Metallic materials—Tensile testing at ambient temperature GB/T 228.1-2010 Metallic materials—Tensile testing—Part 1:Method of test at room temperature GB/T 228.1-2021 Metallic materials—Tensile testing—Part 1:Method of test at room temperature GB/T 228.2-2015 Metallic materials—Tensile testing—Part 2:Method of test at elevated temperature GB/T 228.3-2019 Metallic materials—Tensile testing—Part 3:Method of test at low temperature GB/T 228.4-2019 Metallic materials—Tensile testing—Part 4:Method of test in liquid helium GB/T 4074.2-1999 Test methods for winding wires—Part 2:Determination of dimensions GB/T 4074.2-2008 Winding wires—Test methods—Part 2:Determination of dimensions GB/T 4074.2-2024 Test methods of winding wires—Part 2:Determination of dimensions GB/T 4074.3-1999 Test methods for winding wires—Part 3:Mechanical properties GB/T 4074.3-2008 Winding wires—Test methods—Part 3:Mechanical properties GB/T 4074.3-2024 Test methods of winding wires—Part 3:Mechanical properties GB/T 4074.5-1999 Test methods for winding wires—Part 5:Electrical properties GB/T 4074.5-2008 Winding wires—Test methods—Part 5:Electrical properties GB/T 4074.5-2024 Test methods of winding wires—Part 5:Electrical properties GB/T 7095.1-1995 Enamelled rectangular wires—Part 1—General GB/T 7095.1-2008 Enamelled rectangular copper winding wires—Part 1:General requirements

Adopt standards

IEC 60317-27:1998

Related Standards

GB/T 4909.10-1985 Replaced

GB/T 4909.10-1985 Test methods for bare wires—Test for continuity of coating—Ammonium persulphate solution method

Publish Date: 1985-01-31

GB/T 4909.11-1985 Replaced

GB/T 4909.11-1985 Test methods for bare wires—Test for adherence of coating

Publish Date: 1985-01-31

GB/T 4909.1-1985 Replaced

GB/T 4909.1-1985 Test methods for bare wires—General

Publish Date: 1985-01-31

GB/T 4909.12-1985 Replaced

GB/T 4909.12-1985 Test methods for bare wires—Solderability test of coating Solder globule method

Publish Date: 1985-01-31

GB/T 4909.2-1985 Replaced

GB/T 4909.2-1985 Test methods for bare wires—Measurement of dimensions

Publish Date: 1985-01-31

GB/T 4909.3-1985 Replaced

GB/T 4909.3-1985 Test methods for bare wires—Tensile test

Publish Date: 1985-01-31