GB/T 8738-1988
Replaced
GB/T 3260.9-2013
Active
National standards
GB/T 3260.9-2013 Methods for chemical analysis of tin—Part 9:Determination of sulphur content—Infra-red absorption method after high frequency induction furnace combustion
GB/T 3260.9-2013 Methods for chemical analysis of tin—Part 9:Determination of sulphur content—Infra-red absorption method after high frequency induction furnace combustion
Basic Information
Standard Code:
GB/T 3260.9-2013
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Analysis methods for heavy metals and their alloys
ICS Name:
Lead, zinc, tin, and their alloys
Publish Date:
2013-12-17
Implement Date:
2014-09-01
Pages:
6 pages
Scope
This part of GB/T 3260 specifies the determination method of sulfur content in tin by high-frequency induction furnace combustion and infrared absorption.
This part is applicable to the determination of sulfur content in tin. The measurement range is 0.000 30%~0.020 0%.
Development Information
Same series standard
GB/T 3260.1-2013 Methods for chemical analysis of tin—Part 1:Determination of copper content—Flame atomic absorption spectrometric method
GB/T 3260.2-2013 Methods for chemical analysis of tin—Part 2:Determination of iron content—1,10-phenanthroline photometric method
GB/T 3260.3-2013 Methods for chemical analysis of tin—Part 3:Determination of bismuth content—KI photometric method and flame atomic absorption spectrometric method
GB/T 3260.4-2013 Methods for chemical analysis of tin—Part 4:Determination of lead content—Flame atomic absorption spectrometric method
GB/T 3260.5-2013 Methods for chemical analysis of tin—Part 5:Determination of antimony content—The malachite green photometric method
GB/T 3260.6-2013 Methods for chemical analysis of tin—Part 6:Determination of arsenic contents—Malachite green arsenic molybdenum heteropoly acid photometric method
GB/T 3260.7-2013 Methods for chemical analysis of tin—Part7:Determination of aluminium content—Electrothermal atomic absorption spectrometric method
GB/T 3260.8-2013 Methods for chemical analysis of tin—Part 8:Determination of zinc content—Flame atomic absorption spectrometric method
GB/T 3260.10-2013 Methods for chemical analysis of tin—Part 10:Determination of cadmium content—Flame atomic absorption spectrometric method
Replace the following standards
Related Standards
GB/T 1470-1988
Replaced
GB/T 1470-1988 Lead and lead-antimony alloy plate
GB/T 1471-1988
Active
GB/T 1471-1988 Lead plate for anode
GB/T 1472-1988
Replaced
GB/T 1472-1988 Lead and lead-antimony alloy tube
GB/T 1473-1988
Active
GB/T 1473-1988 Lead and lead-antimony alloy rod
GB/T 1474-1988
Active