GB/T 8738-1988
Replaced
GB/T 3260.6-2013
Active
National standards
GB/T 3260.6-2013 Methods for chemical analysis of tin—Part 6:Determination of arsenic contents—Malachite green arsenic molybdenum heteropoly acid photometric method
GB/T 3260.6-2013 Methods for chemical analysis of tin—Part 6:Determination of arsenic contents—Malachite green arsenic molybdenum heteropoly acid photometric method
Basic Information
Standard Code:
GB/T 3260.6-2013
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Analysis methods for heavy metals and their alloys
ICS Name:
Lead, zinc, tin, and their alloys
Publish Date:
2013-12-17
Implement Date:
2014-09-01
Pages:
7 pages
Scope
This part of GB/T 3260 specifies the spectrophotometric determination method of malachite green arsenic molybdenum heteropolyacid for the determination of arsenic content in tin.
This part is applicable to the determination of arsenic content in tin. The determination range is 0.000 20% to 0.120%.
Development Information
Same series standard
GB/T 3260.1-2013 Methods for chemical analysis of tin—Part 1:Determination of copper content—Flame atomic absorption spectrometric method
GB/T 3260.2-2013 Methods for chemical analysis of tin—Part 2:Determination of iron content—1,10-phenanthroline photometric method
GB/T 3260.3-2013 Methods for chemical analysis of tin—Part 3:Determination of bismuth content—KI photometric method and flame atomic absorption spectrometric method
GB/T 3260.4-2013 Methods for chemical analysis of tin—Part 4:Determination of lead content—Flame atomic absorption spectrometric method
GB/T 3260.5-2013 Methods for chemical analysis of tin—Part 5:Determination of antimony content—The malachite green photometric method
GB/T 3260.7-2013 Methods for chemical analysis of tin—Part7:Determination of aluminium content—Electrothermal atomic absorption spectrometric method
GB/T 3260.8-2013 Methods for chemical analysis of tin—Part 8:Determination of zinc content—Flame atomic absorption spectrometric method
GB/T 3260.9-2013 Methods for chemical analysis of tin—Part 9:Determination of sulphur content—Infra-red absorption method after high frequency induction furnace combustion
GB/T 3260.10-2013 Methods for chemical analysis of tin—Part 10:Determination of cadmium content—Flame atomic absorption spectrometric method
Replace the following standards
Related Standards
GB/T 1470-1988
Replaced
GB/T 1470-1988 Lead and lead-antimony alloy plate
GB/T 1471-1988
Active
GB/T 1471-1988 Lead plate for anode
GB/T 1472-1988
Replaced
GB/T 1472-1988 Lead and lead-antimony alloy tube
GB/T 1473-1988
Active
GB/T 1473-1988 Lead and lead-antimony alloy rod
GB/T 1474-1988
Active