GB 1251.1-1989
Replaced
DB31/T 1086-2018
Abolished
Shanghai CityLocal standards
DB31/T 1086-2018 Basic requirements of applications for intrusion alarm system
DB31/T 1086-2018 Basic requirements of applications for intrusion alarm system
Basic Information
Standard Code:
DB31/T 1086-2018
Standard Type:
Local standards
Standard Status:
Abolished
is_force_gb:
no
CCS Name:
Social public safety
ICS Name:
Alarm and warning systems
Publish Date:
2018-05-21
Implement Date:
2018-08-01
Pages:
16 pages
Scope
This standard specifies the basic requirements, technical requirements, evaluation, acceptance, and maintenance for the application of intrusion alarm systems.
This standard applies to the design, evaluation, construction, inspection, acceptance, and maintenance of intrusion alarm systems. Other security subsystems with intrusion alarm functions are also applicable to this standard.
Intrusion alarm systems under construction or already in use should be modified (expanded) and upgraded in accordance with this standard.
Development Information
Referenced Standards
GB/T 4208-2008 Degrees of protection provided by enclosure(IP code)
GB 7946-1987 Installation and safe operation of electrically energized entanglements and electric fences
GB/T 7946-2008 Electrical installation and safe operation of electric security fences
GB/T 7946-2015 Electrical installation and safe operation of electric security fences
GB 10408.1-2000 Detectors for intruder alarm systems Part 1:Requirements for detectors—General
GB 10408.2-2000 Detectors for intruder alarm systems—Part 2:Ultrasonic Doppler detectors for use in buildings
GB 10408.3-2000 Detectors for intruder alarm systems Part 3:Microwave Doppler detectors for use in buildings
GB 10408.4-2000 Detectors for intruder alarm systems—Part 4:Active infrared intrusion detectors
GB 10408.5-2000 Detectors for intruder alarm systems—Part 5:Passive infra-red detectors for use in buildings
GB 10408.6-1991 Combination microwave and passive infrared intrusion detector
GB 10408.6-2009 Combined passive infrared and microwave detector
GB/T 10408.8-1997 Vibration intrusion detectors
GB/T 10408.8-2008 Vibration intrusion detector
GB 12663-2001 General specifications for burglar-alarm control units
GB 12663-2019 Intrusion and hold-up alarm systems—Control and indicating equipment
GB 15209-1994 Magnetic switch intrusion detectors
GB 15209-2006 Magnetic switch intrusion detectors
GB/T 15211-2013 Security alarm equipments—Environmental adaptability requirements and test methods
GB 15407-1994 Performance criteria and test methods for microwave interruption intrusion detector
GB 15407-2010 Specification of microwave interruption intrusion detector
GB/T 15408-1994 Alarm system power units, test methods and performance criteria
GB/T 15408-2011 Technical requirement of power-supply for security & protection system
GB 16796-1997 Safety requirements and test methods for security alarm equipment
GB 16796-2009 Safety requirements and test methods for security alarm equipment
GB 16796-2022 Security alarm equipment—Safety requirements and test methods
GB/T 22239-2008 Information security technology—Baseline for classified protection of information system security
GB/T 22239-2019 Information security technology—Baseline for classified protection of cybersecurity
GB 25287-2010 Perimeter protection high-voltage device
GB 25287-2023 Perimeter protection high-voltage grid device
GB/T 30147-2013 Technical requirements for real time intelligent video analysis devices in surveillance system
GB/T 30148-2013 Security alarm equipments—EMC immunity requirements and test methods
GB/T 31132-2014 Intrusion alarm systems—Technical requirements for interconnection of equipment using radio frequency
GB/T 32581-2016 Specifications for intrusion and hold-up alarm systems
GB 50311-2016 Code for engineenng design of generic cabling system
GB 50348-2018 Technical standard for security engineering
GA/T 75-1994 Security precautions engineering procedures and requirements
GA 308-2001 Acceptance rules for security prevention system
GA/T 368-2001 The technical requirements for intrusion alarm system
GA/T 394-2002 Entry/exit control system technical requirements GA/T 394-2002
GA/T 1031-2012 General technical requirements for leaky cable intrusion detecting devices
GA/T 1032-2013 General technical requirements for electronic tension fences
GA/T 1158-2014 Technical requirements for thru-beam laser intrusion detectors
GA/T 1217-2015 Technical requirements for optical fiber vibration intrusion detectors
YD/T 1099-2013 Ethernet switch technical requirements
YD/T 1099-2005 Ethernet switch technical requirements
YD/T 1141-2022 YD/T 1141-2022 Ethernet Switch Test Methods
YD/T 1141-2007 YD/T 1141-2007 Ethernet Switch Test Methods
GB 50312-2016 Integrated cabling system engineering acceptance specification
GB 50394-2007 Code of design for intrusion alarm systems engineering
Related Standards
GB/T 12800-1991
Active
GB/T 12800-1991 Acoustics—Audible emergency evacuation signal
GB/T 12787-1991
Replaced
GB/T 12787-1991 Warning equipment for criticality accidents
GB/T 14918-1994
Active
GB/T 14918-1994 General specification of signal pistol
GB 15207-1994
Abolished
GB 15207-1994 Video motion detector
GB 15209-1994
Replaced