GB/T 30569-2014 Active National standards

GB/T 30569-2014 Structural design specification for precision cold forging of straight bevel gear

Publish Date: 2014-05-06 Implement Date: 2014-12-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 30569-2014

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Forging and pressing

ICS Name: \nSteel forgings

Publish Date: 2014-05-06

Implement Date: 2014-12-01

Pages: 11 pages

Scope

This standard specifies the structural elements, dimensional marking, and measurement of cold precision forged straight bevel gears (hereinafter referred to as "cold forged parts"). Based on the characteristics of the cold precision forging process, it proposes an optimized structural form for cold precision forged straight bevel gears.
This standard applies to forged parts of straight bevel gears whose tooth parts are finally formed by the precision cold forging process on a press, with a module of the large end end face ≤10 and a tooth part diameter ≤180 mm.

Development Information

Word Count: 20 Thousand words Pages: 11 pages

Referenced Standards

GB/T 11365-1989 Accuracy of bevel and hypoid gears JB/T 4201-1999 Technical Specifications for Precision Hot Forged Parts of Straight-Tooth Bevel Gears JB/T 9181-1999 Precision hot forging structure design specifications for straight bevel gears QC/T 270-2023 The allowable deviation limits for the unnotched dimensions of vertical forging steel components used in automobiles

Related Standards

GB/T 13320-2007 Active

GB/T 13320-2007 Metellographic grading atlas and assessing method for steel die forgings

Publish Date: 2007-04-18

GB/T 20911-2007 Active

GB/T 20911-2007 Semi finished products for forging—Tolerances on dimensions shape and mass

Publish Date: 2007-04-18

GB/T 21469-2008 Active

GB/T 21469-2008 Machining allowances and tolerances for steel open die forgings on hammer—General requirement

Publish Date: 2008-02-28

GB/T 21470-2008 Active

GB/T 21470-2008 Machining allowances and tolerances for steel open die forgings on hammer—Disks,columns,rings and seamless cylindrical sleeves

Publish Date: 2008-02-28

GB/T 21471-2008 Active

GB/T 21471-2008 Machining allowances and tolerances for steel open die forgings on hammer—Shafts

Publish Date: 2008-02-28

GB/T 22131-2008 Replaced

GB/T 22131-2008 Practice for ultrasonic examination from bored surfaces of cylindrical forgings

Publish Date: 2008-06-25