GB 4962-1985
Replaced
GB/T 17873-2014
Replaced
National standards
GB/T 17873-2014 Pure neon and high purity neon
GB/T 17873-2014 Pure neon and high purity neon
Basic Information
Standard Code:
GB/T 17873-2014
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Industrial gases and chemical gases
ICS Name:
Industrial gases
Publish Date:
2014-07-08
Implement Date:
2014-12-01
Pages:
12 pages
Scope
This standard specifies the technical requirements, test methods, inspection rules, packaging, marking, storage, transportation, and safety warnings for pure neon and high-purity neon.
This standard applies to pure neon and high-purity neon extracted by cryogenic methods, which are mainly used in neon lights and as a filling medium in the electronics industry. They are also used in laser technology, high-energy physics, and the preparation of mixed gases.
Molecular formula: Ne.
Relative molecular mass: 20.1797 (according to the 2009 International Atomic Weight Table).
Development Information
Replace the following standards
Superseded by the following standards
Referenced Standards
气瓶安全监察规程
危险化学品安全管理条例
GB 190-1990 Labels for packages of dangerous goods
GB 190-2009 Packing symbol of dangerous goods
GB/T 5099-1994 Seamless steel gas cylinders
GB/T 5099.1-2017 Seamless steel gas cylinders—Part 1:Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa
GB/T 5099.3-2017 Seamless steel gas cylinders—Part 3:Normalized cylinders
GB/T 5099.4-2017 Seamless steel gas cylinders—Part 4:Seamless stainless steel gas cylinders
GB/T 5832.1-2003 Determination of moisture in gases—Part 1:Electrolytic method
GB/T 5832.1-2016 Gas analysis—Determination of moisture—Part 1:Electrolytic method
GB/T 5832.2-1986 Determination of trace water in the gases—Dew point method
GB/T 5832.2-2008 Determination of moisture in gases—Part 2:Dew point method
GB/T 5832.2-2016 Gas analysis—Determination of moisture—Part 2:Dew point method
GB 7144-1999 Colored cylinder mark for gases
GB/T 7144-2016 Coloured cylinder mark for gases
GB 14194-1993 Rules for filling of permanent gas cylinders
GB/T 14194-2006 Rules for filling of permanent gas cylinders
GB/T 14194-2017 Rules for filling of compressed gas cylinders
GB 15258-1999 General rules for preparation of precautionary label for industrial chemicals
GB 15258-2009 General rules for preparation of precautionary label for chemicals
GB 16804-1997 Precautionary labels for gas cylinders
GB/T 16804-2011 Precautionary labels for gas cylinders
GB/T 28124-2011 Determination of trace hydrogen,oxygen,methane and carbon monoxide in the inert gases—Gas chromatographic method
GB/T 28726-2012 Gas analysis—Gas chromatograph with helium ionization detector
GB/T 28124-2025 Gas analysis—Determination of the trace contents of hydrogen,oxygen,methane and carbon monoxide in inert gases—Gas chromatography with zirconia detector
GB/T 28726-2025 Gas analysis—Gas chromatograph with helium ionization detector
Related Standards
GB/T 8981-1988
Replaced
GB/T 8981-1988 Determination of trace hydrogen in gases—Gas chromatographic method
GB/T 10627-1989
Replaced
GB/T 10627-1989 Gas analysis—Preparation of calibration gas mixtures—Static volumetric methods
GB/T 10628-1989
Replaced
GB/T 10628-1989 Gas analysis—Determination of composition of calibration gas mixtures—Comparison methods
GB 13548-1992
Replaced
GB 13548-1992 General principle of safety assessment for phosgene and its products plant
GB 13591-1992
Replaced