GB/T 17616-1998
Replaced
GB/T 223.13-2025
Active
National standards
GB/T 223.13-2025 Iron,steel and alloy—Determination of vanadium content—Titrimetric method and spectrophotometric method
GB/T 223.13-2025 Iron,steel and alloy—Determination of vanadium content—Titrimetric method and spectrophotometric method
Basic Information
Standard Code:
GB/T 223.13-2025
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Analysis methods for steel and iron alloys
ICS Name:
Black metal comprehensive
Publish Date:
2025-08-29
Implement Date:
2026-03-01
Publisher:
国家市场监督管理总局、国家标准化管理委员会
Technical Committee:
全国钢标准化技术委员会(SAC/TC 183)
Pages:
28 pages
Scope
本文件规定了用硫酸亚铁铵滴定法和钽试剂萃取光度法测定钒含量的方法。
本文件适用于钢铁及合金中钒含量的测定，其中：方法一为硫酸亚铁铵滴定法，适用于钢铁及合金中质量分数为0.1%～10.0%的钒含量的测定，不适用于以下试样中钒含量的测定：a）含钴大于20%（质量分数）试样；b）含铈大于0.01%（质量分数）试样；c）含铬大于20%（质量分数）或含锰大于20%（质量分数）或含钨大于18%（质量分数），钒含量小于0.4%（质量分数）的试样；方法二为N-BPHA（钽试剂）萃取光度法，适用于钢和铸铁中质量分数为0.005%～0.50%的钒含量的测定；方法三为钽试剂萃取光度法，适用于钢铁及合金中质量分数为0.005%～0.50%的钒含量的测定。
Development Information
Drafting Units:
钢研纳克江苏检测技术研究院有限公司、钢研纳克检测技术股份有限公司、建龙北满特殊钢有限责任公司、鞍钢股份有限公司、上海材料研究所有限公司、中钢集团郑州金属制品研究院股份有限公司、江苏澄信检验检测认证股份有限公司、天津市特种设备监督检验技术研究院、广船国际有限公司、抚顺特殊钢股份有限公司、马鞍山钢铁股份有限公司
Drafting Persons:
张迪、孙晓飞、亢德华、胡瑞萍、刘哲、李颖、韩美、李红菊、罗倩华、苗文慧、于雪、张旭、柴文畅、徐晓萍、瞿晓刚、宋祖峰、于兆斌
Same series standard
GB/T 223.6-2025 Iron,steel and alloy—Determination of boron content—Neutralization titrimetric method and spectrophotometric method
GB/T 223.8-2025 Iron,steel and alloy—Determination of aluminium content—Titrimetric method and spectrophotometric method
GB/T 223.11-2025 Iron, steel and alloy—Determination of chromium content—Titrimetric method and spectrophotometric method
Replace the following standards
GB/T 223.13-2000 Methods for chemical analysis of iron,steel and alloy The ammonium ferrous sulfate titration method for the determination of vanadium content
GB/T 223.14-2000 Methods for chemical analysis of iron,steel and alloy The N-benzoy-N-phenylhydroxylamine extraction photometric method for the determination of vanadium content
Referenced Standards
GB/T 6379.1-2004 Accuracy(trueness and precision)of measurement methods and results—Part 1:General principles and definitions
GB/T 6379.2-2004 Accuracy(trueness and precision)of measurement methods and results—Part 2:Basic method for the determination of repeatability and reproducibility of a standard measurement method
GB/T 6682-1992 Water for analytical laboratory use—Specification and test methods
GB/T 6682-2008 Water for analytical laboratory use—Specification and test methods
GB/T 7729-2021 Chemical analysis of metallurgical products—General rule for spectrophotometric methods
GB/T 12805-1991 Laboratory glassware—Burettes
GB/T 12805-2011 Laboratory glassware—Burettes
GB/T 12806-1991 Laboratory glassware—One-mark volumetric flasks
GB/T 12806-2011 Laboratory glassware—One-mark volumetric flasks
GB/T 12808-1991 Laboratory glassware—One-mark pipettes
GB/T 12808-2015 Laboratory glassware—One mark pipettes
GB/T 20066-2006 Steel and iron—Sampling and preparation of samples for the determination of chemical composition
ISO 648
Adopt standards
ISO 4942:2016
Related Standards
GB/T 5686.4-1998
Replaced
GB/T 5686.4-1998 Methods for chemical analysis of silicomanganese—The phosphomolybdenum blue phtometric method for the determination of phosphorus content
GB/T 18255-2000
Replaced
GB/T 18255-2000 Coking viscous oil products—Determination of distillation range
GB/T 4223-2004
Replaced
GB/T 4223-2004 Iron and steel scraps
GB/T 20066-2006
Active
GB/T 20066-2006 Steel and iron—Sampling and preparation of samples for the determination of chemical composition
GB/T 11261-2006
Active