GB/T 3641-1983
abolished_transferred
T/CADBM 8-2018
Active
Group standards
T/CADBM 8-2018 Stainless steel corrugated hose and fittings for cold and hot water construction
T/CADBM 8-2018 Stainless steel corrugated hose and fittings for cold and hot water construction
Price:
$ 24.00
Basic Information
Standard Code:
T/CADBM 8-2018
Standard Type:
Group standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Building water supply and drainage projects
ICS Name:
Hoses and hose assemblies
Publish Date:
2018-12-01
Implement Date:
2018-12-30
Pages:
16 pages
Scope
This standard specifies the classification and models, requirements, test methods, inspection rules, marking, packaging, transportation, and storage of stainless steel corrugated hoses and fittings for building hot and cold water transmission (hereinafter referred to as "hoses and fittings"). This standard applies to hoses and fittings used in geothermal heating systems with a nominal size not exceeding DN32 and a nominal pressure not exceeding 1.0 MPa, and a water supply temperature not exceeding 60℃, or used in water supply pipelines with a water supply temperature not exceeding 90℃ and for connecting water supply fittings with each other.
Development Information
Referenced Standards
GB/T 191-2000 Packaging—Pictorial marking for handling of goods
GB/T 191-2008 Packaging—Pictorial marking for handling of goods
GB/T 2828.1-2003 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 2828.1-2012 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 3280-1992 Cold rolled stainless steel sheets and plates
GB/T 3280-2007 Cold rolled stainless steel plate, sheet and strip
GB/T 3280-2015 Cold rolled stainless steel plate, sheet and strip
GB/T 5231-2001 Wrought copper and copper alloys chemical composition limits and forms of wrought products
GB/T 5231-2012 Designation and chemical composition of wrought copper and copper alloys
GB/T 5231-2022 Designation and chemical composition of wrought copper and copper alloys
GB/T 7306.1-2000 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads—Part 1:Parallel internal and taper external threads
GB/T 7306.2-2000 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads—Part 2:Taper internal and external threads
GB/T 7759.1-2015 Rubber,vulcanized or thermoplastic—Determination of compression set—Part 1:At ambient or elevated temperatures
GB/T 8815-2002 Plasticized polyvinyl chloride (PVC) compounds for wire and cable
GB/T 8815-2008 Plasticized polyvinyl chloride(PVC)compounds for wire and cable
GB/T 10125-1997 Corrosion tests in artificial atmospheres—Salt spray tests
GB/T 10125-2012 Corrosion tests in artificial atmospheres—Salt spray tests
GB/T 10125-2021 Corrosion tests in artificial atmospheres—Salt spray tests
GB/T 17219-1998 Standard for safety evaluation of equipment and protective materials in drinking water system
GB/T 17219-2025 Hygienic safety evaluation of distribution equipment,protective materials and treatment materials in drinking water system
GB/T 191-2025 Graphical symbols marking for handling and storage of packages
Related Standards
GB/T 3642-1983
abolished_transferred
GB/T 3642-1983 Type S brazed stainless steel flexible metallic hose
GB 6969-1986
Replaced
GB 6969-1986 Rubber suction hose for fire-fighting purpose performance requirements and test methods
GB/T 12721-1991
Replaced
GB/T 12721-1991 Rubber hoses—Determination of abrasion resistance of the outer cover
GB/T 12722-1991
Replaced
GB/T 12722-1991 Rubber and plastics hose assemblies—Flexing combined with hydraulic impulse test (Half omega test)
GB/T 1186-1992
Replaced