GB/T 4616-1984
Replaced
JG/T 450-2014
Active
Industry standards-The construction industry
JG/T 450-2014 Ethylene vinyl acetate(EVA) interlayer for building mounted photovoltaic module
JG/T 450-2014 Ethylene vinyl acetate(EVA) interlayer for building mounted photovoltaic module
Basic Information
Standard Code:
JG/T 450-2014
Standard Type:
Industry standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Plastic profiles
ICS Name:
Thermosetting plastics
Publish Date:
2014-09-29
Implement Date:
2015-04-01
Pages:
15 pages
Scope
This standard specifies the terms and definitions, product classification, requirements, test methods, inspection rules, marking, packaging, transportation, and storage of ethylene-vinyl acetate copolymer (EVA) film (hereinafter referred to as EVA film) for building photovoltaic modules.
This standard applies to EVA film used in photovoltaic modules installed on the outside of building envelopes and in building sites.
Development Information
Referenced Standards
GB/T 1033.1-2008 Plastics—Methods for determining the density of non-cellular plastics—Part 1:Immersion method,liquid pyknometer method and titration method
GB/T 1040.1-2006 Plastics—Determination of tensile properties—Part 1:General principles
GB/T 1040.3-2006 Plastics—Determination of tensile properties—Part 3:Test conditions for films and sheets
GB/T 1410-2006 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
GB/T 16935.1-2008 Insulation coordination for equipment within low-voltage systems—Part 1:Principles,requirements and tests
GB/T 29551-2013 Laminated solar PV glazing materials in building
IEC 61730-2-2004
IEC 61215
GB/T 1034-1998 Plastics—Determination of water absorption
GB/T 1034-2008 Plastics—Determination of water absorption
GB/T 2410-1980 Transparent plastics—Transmissivity and haze test
GB/T 2410-2008 Determination of the luminous transmittance and haze of transparent plastics
GB/T 2680-1994 Determination of light transmittance, solar direct transmittance, total solar energy transmittance and ultraviolet transmittance for glass in building and related glazing factors
GB/T 2680-2021 Glass in building—Determination of light transmittance,solar direct transmittance,total solar energy transmittance,ultraviolet transmittance and related glazing factors
GB/T 2790-1995 Adhesives, 180° peel strength test method for a flexible-bonded-to-rigid test specimen assembly
GB/T 2828.1-2003 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 2828.1-2012 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
JC/T 2166-2013 The adhesive used for sandwich glass is polyvinyl butyral (PVB) film
HG/T 3862-2006 Plastics--Yellow index test method
Related Standards
GB/T 4617-1984
Replaced
GB/T 4617-1984 Phenolic mouldings—Determination of acetone-soluble matter
GB/T 5471-1985
Replaced
GB/T 5471-1985 Preparation method for compression moulding of specimens of thermosetting moulding materials
GB/T 5472-1985
abolished_transferred
GB/T 5472-1985 Test method for rectangular flow cure properties of thermosetting moulding compounds
GB/T 5473-1985
Replaced
GB/T 5473-1985 Phenol-formaldehyde mouldings—Detection of free ammonia
GB/T 5474-1985
Replaced