GB/T 1040.3-2006 Active National standards

GB/T 1040.3-2006 Plastics—Determination of tensile properties—Part 3:Test conditions for films and sheets

GB/T 1040.3-2006 Plastics—Determination of tensile properties—Part 3:Test conditions for films and sheets

Publish Date: 2006-09-01 Implement Date: 2007-02-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 1040.3-2006

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Basic standards and general methods for synthetic resins and plastics

ICS Name: Plastic Composite

Publish Date: 2006-09-01

Implement Date: 2007-02-01

Pages: 8 pages

Scope

1.1 This part of GB/T 1040 specifies the test conditions for determining the tensile properties of plastic films or sheets with a thickness of less than 1 mm, based on Part 1. Note: Sheets with a thickness of more than 1 mm are specified in GB/T 1040.2.[HT] 1.2 See 1.2 in GB/T 1040.1-2006. 1.3 This part is generally not applicable to determining the tensile properties of the following materials: a) Foam plastics; b) Textile fiber-reinforced plastics. 1.4 See 1.5 in GB/T 1040.1-2006.

Development Information

Word Count: 12 Thousand words Pages: 8 pages

Same series standard

GB/T 1040.1-2006 Plastics—Determination of tensile properties—Part 1:General principles GB/T 1040.2-2006 Plastics—Determination of tensile properties—Part 2:Test conditions for moulding and extrusion plastics GB/T 1040.4-2006 Plastics—Determination of tensile properties—Part 4:Test conditions for isotropic and orthotropic fibre-reinforced plastic composites

Replace the following standards

GB/T 1040-1992 GB/T 13022-1991 Plastics—Determination of tensile properties of films

Referenced Standards

GB/T 1040.1-2006 Plastics—Determination of tensile properties—Part 1:General principles GB/T 6672-2001 Plastics film and sheeting—Determination of thickness by mechanical scanning ISO 4591:1992

Adopt standards

ISO 527-3:1995

Related Standards

GB/T 12000-1989 Replaced

GB/T 12000-1989 Plastics—Test methods of exposure to damp heat, steady state

Publish Date: 1989-12-25

GB/T 15585-1995 Abolished

GB/T 15585-1995 Determination of shrinkage for injection moulding thermoplastics

Publish Date: 1995-06-12

GB/T 15596-1995 Replaced

GB/T 15596-1995 Plastics—Determination of changes in Color and variations in properties after exposure to daylight under glass, natural weathering or artificial light

Publish Date: 1995-06-12

GB/T 15598-1995 abolished_transferred

GB/T 15598-1995 Testing methods for shear strength of plastics by punch tool

Publish Date: 1995-06-12

GB/T 1843-1996 Replaced

GB/T 1843-1996 Plastics—Determination of izod impact strength

Publish Date: 1996-06-14

GB/T 2035-1996 Replaced

GB/T 2035-1996 Terms and definitions for plastics

Publish Date: 1996-06-14