GB/T 9074.32-2017 Active National standards

GB/T 9074.32-2017 Bolt or screw and washer assemblies with conical spring washers

GB/T 9074.32-2017 Bolt or screw and washer assemblies with conical spring washers

Publish Date: 2017-12-29 Implement Date: 2018-04-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 9074.32-2017

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Fasteners

ICS Name: Bolts, screws, and studs

Publish Date: 2017-12-29

Implement Date: 2018-04-01

Pages: 6 pages

Scope

This part of GB/T 9074 specifies the type and dimensions, technical requirements, and marking of bolt or screw and conical elastic washer assemblies. This part is applicable to bolts or screws with thread specifications of M2.5 to M12 and performance grades of 8.8 and 10.9 (GB/T 3098.1), and to bolt or screw and conical elastic washer assemblies (hereinafter referred to as assemblies) with washer hardness of 420 HV to 490 HV.

Development Information

Word Count: 10 Thousand words Pages: 6 pages

Same series standard

GB/T 9074.18-2017 Tapping screw and washer assemblies with plain washers GB/T 9074.31-2017 Conical spring washers for assemblies

Referenced Standards

GB/T 90.1-2002 Fasteners—Acceptance inspection GB/T 90.1-2023 Fasteners—Acceptance inspection GB/T 90.2-2002 Fasteners—Marking and packaging GB/T 94.4-2017 Specifications for spring washers—Conical spring washers GB/T 1237-2000 Designation system for fasteners GB/T 3098.1-2000 Mechanical properties of fasteners—Bolts, screws and studs GB/T 3098.1-2010 Mechanical properties of fasteners—Bolts,screws and studs GB/T 5267.1-2002 Fasteners—Electroplated coatings GB/T 5267.1-2023 Fasteners—Electroplate coating GB/T 5267.2-2002 Fasteners—Non-electrolytically applied zinc flake coatings GB/T 5267.2-2017 Fasteners—Non-electrolytically applied zinc flake coatings GB/T 5267.2-2021 Fasteners—Non-electrolytically applied zinc flake coatings GB/T 9074.31-2017 Conical spring washers for assemblies

Related Standards

GB/T 3750.3-1983 Replaced

GB/T 3750.3-1983 Hollow screws

Publish Date: 1983-06-17

GB/T 5277-1985 Active

GB/T 5277-1985 Fasteners—Clearance holes for bolts and screws

Publish Date: 1985-08-01

GB/T 6560-1986 Replaced

GB/T 6560-1986 Cross recessed pan head thread forming screws

Publish Date: 1986-07-02

GB/T 6561-1986 Replaced

GB/T 6561-1986 Cross recessed countersunk head thread forming screws

Publish Date: 1986-07-02

GB/T 6562-1986 Replaced

GB/T 6562-1986 Cross recessed raised countersunk head thread forming screws

Publish Date: 1986-07-02

GB/T 6563-1986 Replaced

GB/T 6563-1986 Hexagon head thread forming screws

Publish Date: 1986-07-02