GB/T 13663.5-2018 Active National standards

GB/T 13663.5-2018 Polyethylene (PE) piping systems for water supply—Part 5:Fitness for purpose of the system

Publish Date: 2018-03-15 Implement Date: 2018-10-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 13663.5-2018

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Plastic profiles

ICS Name: Plastic pipes, fittings, and valves

Publish Date: 2018-03-15

Implement Date: 2018-10-01

Pages: 19 pages

Scope

This part of GB/T 13663 specifies the terms and definitions, symbols, abbreviations, component types, sample preparation, and requirements applicable to polyethylene (PE) piping systems for water supply. Together with other parts of GB/T 13663, this part is applicable to pressure water supply systems and drinking water distribution piping systems and their components, where the water temperature does not exceed 40 °C and the maximum operating pressure (MOP) does not exceed 2.0 MPa, for general-purpose pressure water supply applications.

Development Information

Word Count: 34 Thousand words Pages: 19 pages

Same series standard

GB/T 13663.2-2018 Polyethylene(PE)piping systems for water supply—Part 2:Pipes GB/T 13663.3-2018 Polyethylene(PE)piping systems for water supply—Part 3:Fittings

Referenced Standards

GB/T 6111-2003 Thermoplastics pipes for the conveyance of fluids-Resistance to internal pressure—Test method GB/T 13663.1-2017 Polyethylene(PE)piping systems for water supply—Part 1:General GB/T 13663.3-2018 Polyethylene(PE)piping systems for water supply—Part 3:Fittings GB/T 15820-1995 Test of resistance to pull out of joints between polyethylene (PE) pressure pipes and fittings GB/T 19278-2003 General terms and their definitions of thermoplastic pipes, fittings and valves GB/T 19806-2005 Plastics pipes and fittings—Crushing decohesion test for polyethylene(PE) electrofusion assemblies GB/T 19807-2005 Plastics pipes and fittings—Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting GB/T 19808-2005 Plastics pipes and fittings—Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm GB/T 19809-2005 Plastics pipes and fittings—Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion GB/T 19810-2005 Polyethylene (PE) pipe and fittings—Determination of the tensile strength and failure mode of test pieces from a butt-fused joint

Adopt standards

ISO 4427-5:2007

Related Standards

GB/T 13663-2000 Replaced

GB/T 13663-2000 Polyethylene pipes for water supply

Publish Date: 2000-11-21

GB/T 18251-2000 Replaced

GB/T 18251-2000 Method for the assessment of pigment or carbon black dispersion in polyolefin pipes,fittings and compounds

Publish Date: 2000-11-21

GB/T 18252-2000 Replaced

GB/T 18252-2000 Plastics piping and ducting systems—Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation

Publish Date: 2000-11-21

GB/T 18477-2001 Replaced

GB/T 18477-2001 Unplasticized polyvinyl chloride(PVC-U) double wall corrugated pipes for underground soil, waste and drainage

Publish Date: 2001-10-24

GB/T 18742.1-2002 Replaced

GB/T 18742.1-2002 Polypropylene piping systems for hot and cold water installations—Part 1:General

Publish Date: 2002-05-29

GB/T 18742.2-2002 Replaced

GB/T 18742.2-2002 Polypropylene piping systems for hot and cold water installations—Part 2:Pipes

Publish Date: 2002-05-29