GB/T 13259-1991
Replaced
GB/T 24333-2009
Replaced
National standards
GB/T 24333-2009 Metal halide lamps (NaI-TlI-InI3 series)—Performance requirements
GB/T 24333-2009 Metal halide lamps (NaI-TlI-InI3 series)—Performance requirements
Basic Information
Standard Code:
GB/T 24333-2009
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Electric light source products
ICS Name:
Fluorescent lamps and discharge lamps
Publish Date:
2009-09-30
Implement Date:
2010-02-01
Pages:
31 pages
Scope
This standard specifies the product models, main dimensions, technical requirements, test methods, inspection rules, marking, packaging, transportation, and storage of sodium-thallium-indium series metal halide lamps. This standard applies to sodium-thallium-indium series metal halide lamps with a power of 250 W to 2,000 W (hereinafter referred to as "lamps"). Lamps that comply with this standard should also comply with GB 19652-2005. When using ballasts and triggers that meet the requirements specified in this standard, the lamps can be successfully started and ignited within the range of 92% to 106% of the rated power supply voltage and an ambient temperature of -20°C to 40°C. The ignition position of the bulb is specified in the lamp parameter table.
Development Information
Superseded by the following standards
Referenced Standards
GB/T 13434-2008 Methods of measuring characteristics for discharge lamps (excluding fluorescent lamps)
GB 19652-2005 Discharge lamps(excluding fluorescent lamps)—Safety specifications
GB/T 191-2000 Packaging—Pictorial marking for handling of goods
GB/T 191-2008 Packaging—Pictorial marking for handling of goods
GB/T 2423.10-1995 Environmental testing for electric and electronic products—Part 2:Test methods—Test Fc and guidance:Vibration (Sinusoidal)
GB/T 2423.10-2008 Environmental testing for electric and electronic products—Part 2:Tests methods Test Fc:Vibration(sinusoidal)
GB/T 2423.10-2019 Environmental testing—Part 2:Tests methods—Test Fc:Vibration(sinusoidal)
GB/T 2828.1-2003 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 2828.1-2012 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 2829-2002 Sampling procedures and tables for periodic inspection by attributes (Apply to inspection of process stability)
GB/T 2900.65-2004 Electrotechnical terminology—Lighting
GB/T 2900.65-2023 Electrotechnical terminology—Lighting
GB/T 15042-1994 Ballast for high pressure sodium lamp property requirement
GB/T 15042-2005 Auxiliaries for lamps—Ballasts for discharge lamps(excluding tubular fluorescent lamps)—Performance requirements
GB/T 15042-2008 Auxiliaries for lamps—Ballasts for discharge lamps(excluding tubular fluorescent lamps)—Performance requirements
QB/T 2274-2013 Classification and model naming methods for electric light source products
QB 2274-1996 The classification and model naming methods for electric light source products
GB/T 191-2025 Graphical symbols marking for handling and storage of packages
GB/T 2829-2025 Sampling procedures and tables for periodic inspection by attributes(Apply to inspection of process stability)
Related Standards
GB/T 13434-1992
Replaced
GB/T 13434-1992 Test method for H.P.S.Lamps
GB 14045-1993
Replaced
GB 14045-1993 Ballasts for discharge lamps (excluding tubular fluorescent lamps) general and safety requirements
GB/T 14094-1993
Replaced
GB/T 14094-1993 Tungsten halogen lamps
GB/T 14044-1993
Replaced
GB/T 14044-1993 Ballasts for tubular fluorescent lamps—Performance requirements
GB/T 15041-1994
Replaced