GB/T 4011-1983
Replaced
T/SHPTA 032.1-2022
Active
Group standards
T/SHPTA 032.1-2022 500kV and below offshore wind AC submarine cable for crosslinked polyethylene cable material Part 1: Insulation material
T/SHPTA 032.1-2022 500kV and below offshore wind AC submarine cable for crosslinked polyethylene cable material Part 1: Insulation material
Price:
$ 24.00
Basic Information
Standard Code:
T/SHPTA 032.1-2022
Standard Type:
Group standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Cables and their accessories
ICS Name:
Cable
Publish Date:
2022-12-21
Implement Date:
2023-01-21
Pages:
12 pages
Scope
This document specifies the technical requirements, test methods, inspection rules, packaging, marking, transportation, and storage for cross-linkable polyethylene insulation materials used in AC submarine cables for offshore wind power with voltages of 500 kV and below.
This document applies to cross-linkable polyethylene insulation materials made from low-density polyethylene as the base material, mixed with additives such as antioxidants and cross-linking agents, and then processed into pellets for peroxide cross-linking. Its scope of application includes:
a) Cross-linkable polyethylene insulation materials for AC submarine cables for offshore wind power with voltages of >6 kV to 35 kV;
b) Cross-linkable polyethylene insulation materials for AC submarine cables for offshore wind power with voltages of >35 kV to 110 kV;
c) Cross-linkable polyethylene insulation materials for AC submarine cables for offshore wind power with voltages of >110 kV to 220 kV;
d) Cross-linkable polyethylene insulation materials for AC submarine cables for offshore wind power with voltages of >220 kV to 500 kV.
Development Information
Same series standard
Referenced Standards
GB/T 1033.1-2008 Plastics—Methods for determining the density of non-cellular plastics—Part 1:Immersion method,liquid pyknometer method and titration method
GB/T 1040.2-2022 Plastics—Determination of tensile properties—Part 2:Test conditions for moulding and extrusion plastics
GB/T 1408.1-2016 Insulating materials—Test methods for electric strength—Part 1:Test at power frequencies
GB/T 1409-2006 Recommended methods for the determination of the permittivity and dielectric dissipation fator of electrical insulating materials at power,audio and radio frequencies including meter wavelengths
GB/T 2951.12-2008 Common test methods for insulating and sheathing materials of electric and optical cables—Part 12:Methods for general application—Thermal ageing methods
GB/T 2951.21-2008 Common test methods for insulating and sheathing materials of electric and optical cables—Part 21:Methods specific to elastomeric compounds—Ozone resistance, hot set and mineral oil immersion tests
GB/T 3682.1-2018 Plastics—Determination of the melt mass-flow rate(MFR)and melt volume-flow rate(MVR)of thermoplastics—Part 1:Standard method
GB/T 5470-2008 Plastics—Determination of the brittleness temperature by impact
GB/T 16584-1996 Rubber—Measurement of vulcanization characteristics with rotorless curemeters
GB/T 31838.2-2019 Solid insulating materials—Dielectric and resistive properties—Part 2:Resistive properties(DC methods)—Volume resistance and volume resistivity
JB/T 10437-2004 Cross-linkable polyethylene insulating compounds for wires and cables
SH/T 1770-2010 Determination of moisture content in polyethylene plastic
Related Standards
GB/T 4012-1983
Replaced
GB/T 4012-1983 2.6/9.5mm composite coaxial cable for telecommunication use
GB/T 5441.10-1985
Replaced
GB/T 5441.10-1985 Test methods for communication cable—Measurement of actual length of coaxial pair—Sine wave method
GB/T 5441.1-1985
Replaced
GB/T 5441.1-1985 Test methods for communication cable General
GB/T 5441.2-1985
Replaced
GB/T 5441.2-1985 Test methods for communication cable Capacitance test Bridge method
GB/T 5441.3-1985
Replaced