YY 1107-2003 Active Industry standards-Medicine

YY 1107-2003 Buoy type oxygen inhalator

YY 1107-2003 Buoy type oxygen inhalator

Publish Date: 2003-06-20 Implement Date: 2004-01-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: YY 1107-2003

Standard Type: Industry standards

Standard Status: Active

is_force_gb: no

CCS Name: Surgical room equipment

ICS Name: Anesthesia, respiration, and resuscitation equipment

Publish Date: 2003-06-20

Implement Date: 2004-01-01

Pages: 8 pages

Scope

This standard specifies the classification and naming, requirements, test methods, inspection rules, marking, user's manual, and packaging, transportation, and storage of buoyant oxygen inhalers. This standard applies to buoyant oxygen inhalers (hereinafter referred to as inhalers) with an output pressure of 0.20 MPa to 0.30 MPa after decompression. This product is intended for use by medical units for emergency oxygen administration and oxygen inhalation for patients with hypoxia.

Development Information

Word Count: 15 Thousand words Pages: 8 pages

Replace the following standards

YY 91107-1999

Referenced Standards

GB/T 191-2000 Packaging—Pictorial marking for handling of goods GB/T 191-2008 Packaging—Pictorial marking for handling of goods GB/T 2828.1-2003 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection GB/T 2828.1-2012 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection GB/T 2828.2-2008 Sampling procedures for inspection by attributes—Part 2:Sampling plans indexed by limiting quality(LQ)for isolated lot inspection GB/T 2828.3-2008 Sampling procedures for inspection by attributes—Part 3:Skip-lot sampling procedures GB/T 2828.4-2008 Sampling procedures for inspection by attributes—Part 4:Procedures for assessment of declared quality levels GB/T 2828.5-2011 Sampling procedures for inspection by attributes—Part 5:System of sequential sampling plans indexed by acceptance quality limit(AQL)for lot-by-lot inspection GB/T 2828.10-2010 Sampling procedures for inspection by attributes—Part 10:Introduction to the GB/T 2828 series of standards for sampling for inspection by attributes GB/T 2828.11-2008 Sampling procedures for inspection by attributes—Part 11:Procedures for assessment of declared quality levels for small population GB/T 2829-2002 Sampling procedures and tables for periodic inspection by attributes (Apply to inspection of process stability) GB 9969.1-1998 General principles for preparation of instructions for use of industrial products JB/T 9271-1999 Pressure gauges used in welding cutting and related processes GB/T 191-2025 Graphical symbols marking for handling and storage of packages GB/T 2829-2025 Sampling procedures and tables for periodic inspection by attributes(Apply to inspection of process stability)

Related Standards

GB 11246-1989 Abolished

GB 11246-1989 Specifications for continuous flow inhalational anaesthetic machines for use with humans

Publish Date: 1989-03-31

YY 0339-2002 Replaced

YY 0339-2002 Suction catheter for use in the respiratory tract

Publish Date: 2002-09-24

YY/T 0337.1-2002 Active

YY/T 0337.1-2002 Tracheal tubes Part 1:—Commonly-used tubes and connectors

Publish Date: 2002-09-24

YY/T 0337.2-2002 Active

YY/T 0337.2-2002 Tracheal tubes—Part 2:Cole type tube

Publish Date: 2002-09-24

YY/T 0338.1-2002 Replaced

YY/T 0338.1-2002 Tracheostomy tubes—Part 1:Tubes and connectors for adults

Publish Date: 2002-09-24

YY/T 0338.2-2002 Replaced

YY/T 0338.2-2002 Tracheostomy tubes—Part 2:Paediatric tracheostomy tubes

Publish Date: 2002-09-24