GB/T 5823-1986
Replaced
JG/T 416-2013
Active
Industry standards-The construction industry
JG/T 416-2013 Aluminum solar shading panel for building
JG/T 416-2013 Aluminum solar shading panel for building
Basic Information
Standard Code:
JG/T 416-2013
Standard Type:
Industry standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Building components and equipment
ICS Name:
Doors and windows
Publish Date:
2013-09-29
Implement Date:
2014-02-01
Pages:
17 pages
Scope
This standard specifies the terms and definitions, classification and marking, general requirements, technical requirements, test methods, inspection rules, marking, packaging, transportation, and storage of aluminum alloy sunshades used in buildings (referred to as sunshades).
This standard applies to aluminum alloy plate-type sunshade devices installed on the exterior enclosure structures of buildings.
Development Information
Referenced Standards
GB/T 191-2000 Packaging—Pictorial marking for handling of goods
GB/T 191-2008 Packaging—Pictorial marking for handling of goods
GB/T 3190-1996 Wrought aluminium and aluminium alloys—Chemical composition limits
GB/T 3190-2008 Wrought aluminium and aluminium alloy——Chemical composition
GB/T 3190-2020 Chemical composition of wrought aluminium and aluminium alloys
GB/T 3880.2-2006 Wrought aluminium and aluminium alloy plates,sheets and strips for general engineering—Part 2:Mechanical properties
GB/T 3880.2-2012 Wrought aluminium and aluminium alloy plates,sheets and strips for general engineering—Part 2:Mechanical properties
GB/T 3880.2-2024 Wrought aluminium and aluminium alloy plates,sheets and strips for general engineering—Part 2:Mechanical properties
GB/T 3880.3-2006 Wrought aluminium and aluminium alloy plates,sheets and strips for general engineering—Part 3:Tolerances on forms and dimensions
GB/T 3880.3-2012 Wrought aluminium and aluminium alloy plates,sheets and strips for general engineering—Part 3:Tolerances on forms and dimensions
GB/T 3880.3-2024 Wrought aluminium and aluminium alloy plates,sheets and strips for general engineering—Part 3:Tolerances on forms and dimensions
GB 5237.1-2004 Wrought aluminium alloy extruded profiles for architecture—Part 1:Untreated profiles
GB/T 5237.1-2008 Aluminium alloy extruded profiles for architecture—Part 1:Mill finish profiles
GB/T 5237.1-2017 Aluminium alloy extruded profiles for architecture—Part 1:Mill finish profiles
GB 5237.2-2004 Wrought aluminium alloy extruded profiles for architecture—Part 2:Anodized colored profiles
GB/T 5237.2-2008 Wrought aluminium alloy extruded profiles for architecture—Part 2:Anodized profiles
GB/T 5237.2-2017 Wrought aluminium alloy extruded profiles for architecture— Part 2:Anodized profiles
GB 5237.3-2004 Wrought aluminium alloy extruded profiles for architecture—Part 3:Electrophoretic coating profiles
GB/T 5237.3-2008 Wrought aluminium alloy extruded profiles for architecture—Part 3:Electrophoretic coating profiles
GB/T 5237.3-2017 Wrought aluminium alloy extruded profiles for architecture—Part 3:Electrodeposition coating profiles
GB 5237.4-2004 Wrought aluminium alloy extruded profiles for architecture—Part 4:Powder coating profiles
GB/T 5237.4-2008 Wrought aluminium alloy extruded profiles for architecture—Part 4:Powder coating profiles
GB/T 5237.4-2017 Wrought aluminium alloy extruded profiles for architecture—Part 4:Powder coating profiles
GB 5237.5-2004 Wrought aluminium alloy extruded profiles for architecture—Part 5:PVDF coating profiles
GB/T 5237.5-2008 Wrought aluminium alloy extruded profiles for architecture—Part 5:PVDF coating profiles
GB/T 5237.5-2017 Wrought aluminium alloy extruded profiles for architecture— Part 5:Paint coating profiles
GB/T 6388-1986 Transport package shipping mark
GB/T 11186.2-1989 Methods for measuring the color of paint films—Part 2:Colour measurement
GB/T 11186.3-1989 Methods for measuring the color of paint films—Part 3:Calculation of color differences
GB/T 15227-1994 Test method of deformation under wind pressure for building curtain walls
GB/T 15227-2007 Test method of air permeability, water tightness, wind load resistance performance for curtain walls
GB/T 15227-2019 Test method of air permeability,watertightness,wind load resistance performance for curtain walls
GB/T 21086-2007 Curtain wall for building
GB/T 23443-2009 Aluminium panels for building decoration
JG/T 239-2009 External blinds and shutters—Resistance to wind loads—Test methods
JG/T 241-2009 Blinds and shutters—Mechanical endurance—Test methods
JG/T 242-2009 Blinds and shutters—Measurement of operating force—Test methods
JG/T 274-2010 General requirements for building shading product
JG/T 274-2018 General technical requirements for blinds and shutters
JG/T 276-2010 Technical requirements for electrical equipment of building shading product
JG/T 281-2010 Test method for building shading product energy resistant coefficient
JG/T 399-2012 Terminology of solar shading product for building
GB/T 23443-2024 Aluminium panels for building decoration
GB/T 191-2025 Graphical symbols marking for handling and storage of packages
Related Standards
GB/T 5824-1986
Replaced
GB/T 5824-1986 Size system of opening for doors and windows in building
GB/T 5825-1986
Active
GB/T 5825-1986 Symbolic designation of direction of opening and closing and faces of doors and windows
GB/T 5826.1-1986
Replaced
GB/T 5826.1-1986 Basic size system of side hung steel door ( 32, 40mm solid section)
GB/T 5826.2-1986
Abolished
GB/T 5826.2-1986 Basic size system of side hung steel window (25mm solid section)
GB/T 5826.3-1986
Replaced