GB/T 3457-1998
Replaced
YS/T 299-2010
Active
Industry standards-Non-ferrous metals
YS/T 299-2010 Artificial rutile
YS/T 299-2010 Artificial rutile
Basic Information
Standard Code:
YS/T 299-2010
Standard Type:
Industry standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
\nRare light metals and their alloys
ICS Name:
Non-ferrous metal products
Publish Date:
2010-11-22
Implement Date:
2011-03-01
Pages:
5 pages
Scope
This standard specifies the requirements, test methods, inspection rules, and marking, packaging, transportation, storage, quality certificates, and contract (or order form) contents for synthetic rutile.
This standard applies to synthetic rutile products produced using ilmenite as raw material and methods such as pre-oxidation, weak reduction acid leaching, or strong reduction rusting, as well as synthetic rutile products used in the production of titanium tetrachloride and as coatings for welding electrodes. Synthetic rutile products produced by other methods may be implemented as a reference.
Development Information
Replace the following standards
YS/T 299-1994
Referenced Standards
GB/T 1480-1995 Determination of particle size for metallic powders—Dry sieving
GB/T 1480-2012 Metallic powders—Determination of particle size by dry sieving
YS/T 514.1-2009 Methods for chemical analysis of high-titanium slag and rutile—Part 1:Determination of titanium dioxide content—Ferric ammonium sulfate titration
YS/T 514.2-2009 Methods for chemical analysis of high titanium slag and rutile—Part 2:Determination of total iron content—Potassium dichromate titration
YS/T 514.3-2009 Methods for chemical analysis of high titanium slag and rutile—Part 3:Determination of sulfur content—High frequency infrared absorption method
YS/T 514.4-2009 Methods for chemical analysis of high titanium slag and rutile—Part 4:Determination of silicon dioxide content—Gravimetric analysis and molybdenum blue spectrophotometry
YS/T 514.5-2009 Methods for chemical analysis of high titanium slag and rutile—Part 5:Determination of aluminium oxide content—EDTA titration
YS/T 514.6-2009 Methods for chemical analysis of high titanium slag and rutile—Part 6:Determination of manganese monoxide content—Flame atomic absorption spectrometry
YS/T 514.7-2009 Methods for chemical analysis of high titanium slag and rutile—Part 7:Determination of calcium oxide and magnesium oxide content—Flame atomic absorption spectrometry
YS/T 514.8-2009 Methods for chemical analysis of high titanium slag and rutile—Part 8:Determination of phosphorus content—Antimony molybdenum blue spectrophotometry
YS/T 514.9-2009 Methods for chemical analysis of high titanium slag and rutile—Part 9:Determination of calcium oxide、magnesium oxide、manganese monoxide、phosphorus、chromic oxide and vanadium pentoxide content—Inductively coupled plasma atomic emission spectrometry
YS/T 514.10-2009 Methods for chemical analysis of high titanium slag and rutile—Part 10:Determination of carbon content—High frequency infrared absorption method
YS/T 514.1-2006 Methods for chemical analysis of high-titanium slag and rutile--The ammonium ferric sulfate volumetric method for the determination of titanium dioxide content
YS/T 514.2-2006 Methods for chemical analysis of high-titanium slag and rutile--The potassium dichromate volumetric method for the determination of total iron content
YS/T 514.3-2006 Methods for chemical analysis of high-titanium slag and rutile--The extraction-molybdenum blue photometric method for the determination of phosphorus content
YS/T 514.4-2006 Methods for chemical analysis of high-titanium slag and rutile--The direct combustion-coulometric method for the determination of total carbon content
YS/T 514.5-2006 Methods for chemical analysis of high-titanium slag and rutile--The direct combustion-iodimetric method for the determination of sulfur content
YS/T 514.6-2006 Methods for chemical analysis of high-titanium slag and rutile--The barium sulfate gravimetric method for the determination of sulfur content
YS/T 514.7-2006 Methods for chemical analysis of high-titanium slag and rutile--The gravimetric method for the determination of silicon dioxide content
YS/T 514.8-2006 Methods for chemical analysis of high-titanium slag and rutile--The EDTA volumetric method for the determination of aluminium oxide content
YS/T 514.9-2006 Methods for chemical analysis of high-titanium slag and rutile--The persulfate oxidation arsenite volumetric method for the determination of manganous monoxide content
YS/T 514.10-2006 Methods for chemical analysis of high-titanium slag and rutile--The diphenylcarbazide photometric method for the determination of chromium sesquioxide content
YS/T 514.11-2006 Methods for chemical analysis of high-titanium slag and rutile--The benzoyl phenylhydroxylamine extraction photometric method for the determination of vanadium pentoxide content
YS/T 514.12-2006 Methods for chemical analysis of high-titanium slag and rutile--The EDTA and CyDTA volumetric methods for the determination of calcium oxide and magnesium oxide content
GB/T 1480-2025 Metallic powders—Determination of particle size by dry sieving
YS/T 514.9-2024 YS/T 514.9-2024 Chemical analysis methods for high-titanite slag and rutile - Part 9: Determination of impurity element content - Inductively coupled plasma atomic emission spectroscopy
Related Standards
GB/T 6896-1998
Replaced
GB/T 6896-1998 Niobium bars
GB/T 17684-1999
Replaced
GB/T 17684-1999 The terminology for precious metals and their alloys
GB/T 8888-2003
Replaced
GB/T 8888-2003 Wrought heavy non-ferrous metal products-Packing,marking,transporting and storing
YS/T 632-2007
Replaced
YS/T 632-2007 Low grade blister
GB/T 3460-2007
Replaced