GB/T 3390.1-2013 Active National standards

GB/T 3390.1-2013 Hand operated socket wrenches—Socket

GB/T 3390.1-2013 Hand operated socket wrenches—Socket

Publish Date: 2013-11-12 Implement Date: 2014-05-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 3390.1-2013

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Hand tools

ICS Name: Hand tools

Publish Date: 2013-11-12

Implement Date: 2014-05-01

Pages: 13 pages

Scope

This standard specifies the product classification, technical requirements, test methods, inspection rules, packaging, marking, transportation, and storage of manual socket wrench sockets.
This standard applies to manual socket wrench sockets used for installing and removing hexagonal bolts and nuts.

Development Information

Word Count: 24 Thousand words Pages: 13 pages

Same series standard

GB/T 3390.2-2013 Hand operated socket wrenches—Driving squares GB/T 3390.3-2013 Hand operated socket wrenches—Driving parts GB/T 3390.4-2013 Hand operated socket wrenches—Attachments GB/T 3390.5-2013 Hand operated socket wrenches—Inspection,packaging and marking

Replace the following standards

GB/T 3390.1-2004 Hand operated socket wrenches-Socket

Referenced Standards

GB/T 230.1-2004 Metallic Rockwell hardness test—Part1:Test method(scales A、B、C、D、E、F、G、H、K、N、T) GB/T 230.1-2009 Metallic materials—Rockwell hardness test—Part 1:Test method(scales A、B、C、D、E、F、G、H、K、N、T) GB/T 230.1-2018 Metallic materials—Rockwell hardness test—Part 1:Test method GB/T 1957-1981 Limit gauges for plain workpiece GB/T 1957-2006 Tolerances and general features for plain limin gauges GB/T 3390.2-2004 Hand operated socket wrenches—Driving squares GB/T 3390.2-2013 Hand operated socket wrenches—Driving squares GB/T 3390.5-2004 Hand operated socket wrenches—Inspection, packaging and marking GB/T 3390.5-2013 Hand operated socket wrenches—Inspection,packaging and marking GB/T 4390-1995 Spanner gaps and sockets—Metric series-tolerances for general use GB/T 4390-2008 Wrench openings—Tolerances for general use GB/T 4955-1997 Metallic coatings—Measurement of coating thickness—Coulometric method by anodic dissolution GB/T 4955-2005 Metallic coatings—Measurement of coating thickness—Coulometric method by anodic dissolution GB/T 6060.2-1985 Roughness comparison specimens—Ground, turned, bored,milled, shaped and planed GB/T 6060.2-2006 Roughness comparison specimens—Ground,turned,bored,milled,shaped and planed GB/T 6462-1986 Metallic and oxide coatings—Measurement of coating thickness—Microscopical method GB/T 6462-2005 Metallic and oxide coatings—Measurement of coating thickness—Microscopical method GB/T 6462-2025 Metallic and oxide coatings—Measurement of coating thinckness—Microscopical method

Adopt standards

ISO 2725-1:2007

Related Standards

GB/T 1442-1985 Replaced

GB/T 1442-1985 Driving tenons and sockets for parallel shank tools— Dimensions and tolerances

Publish Date: 1985-06-17

GB/T 1443-1996 Replaced

GB/T 1443-1996 Machine tools—Self-holding tapers for tool shanks

Publish Date: 1996-07-05

GB/T 4440-1998 Replaced

GB/T 4440-1998 Adjustable wrenches

Publish Date: 1998-03-25

GB/T 6289-1999 Replaced

GB/T 6289-1999 Pliers and nippers—Nomenclature

Publish Date: 1999-05-28

GB/T 6290-1999 Replaced

GB/T 6290-1999 Pliers and nippers—General technical requirements

Publish Date: 1999-05-28

GB/T 6291-1999 Replaced

GB/T 6291-1999 Pliers and nippers—Methods of test

Publish Date: 1999-05-28