GB/T 3390.2-2013 Active National standards

GB/T 3390.2-2013 Hand operated socket wrenches—Driving squares

GB/T 3390.2-2013 Hand operated socket wrenches—Driving squares

Publish Date: 2013-11-12 Implement Date: 2014-05-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 3390.2-2013

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Hand tools

ICS Name: Hand tools

Publish Date: 2013-11-12

Implement Date: 2014-05-01

Pages: 8 pages

Scope

This standard specifies the classification, technical requirements, test methods, and inspection rules for the drive pins and square holes of manual socket wrenches.
This standard applies to the drive pins and square holes of manual socket wrenches used for installing and removing hexagonal bolts and nuts.

Development Information

Word Count: 14 Thousand words Pages: 8 pages

Same series standard

GB/T 3390.1-2013 Hand operated socket wrenches—Socket GB/T 3390.3-2013 Hand operated socket wrenches—Driving parts GB/T 3390.4-2013 Hand operated socket wrenches—Attachments GB/T 3390.5-2013 Hand operated socket wrenches—Inspection,packaging and marking

Replace the following standards

GB/T 3390.2-2004 Hand operated socket wrenches—Driving squares

Referenced Standards

GB/T 321-1980 Preferred numbers and preferred number series GB/T 321-2005 Preferred numbers—Series of preferred numbers GB/T 1800.1-1997 Limits and fits—Bases—Part 1:Terminology GB/T 1800.1-2009 Geometrical Product Specifications (GPS)—Limits and fits—Part 1:Bases of tolerances,deviations and fits GB/T 1800.1-2020 Geometrical product specifications (GPS)—ISO code system for tolerances on linear sizes—Part 1:Basis of tolerances, deviations and fits GB/T 1957-1981 Limit gauges for plain workpiece GB/T 1957-2006 Tolerances and general features for plain limin gauges GB/T 3390.5-2004 Hand operated socket wrenches—Inspection, packaging and marking GB/T 3390.5-2013 Hand operated socket wrenches—Inspection,packaging and marking GB/T 6060.2-1985 Roughness comparison specimens—Ground, turned, bored,milled, shaped and planed GB/T 6060.2-2006 Roughness comparison specimens—Ground,turned,bored,milled,shaped and planed

Adopt standards

ISO 1174-1:2011

Related Standards

GB/T 1442-1985 Replaced

GB/T 1442-1985 Driving tenons and sockets for parallel shank tools— Dimensions and tolerances

Publish Date: 1985-06-17

GB/T 1443-1996 Replaced

GB/T 1443-1996 Machine tools—Self-holding tapers for tool shanks

Publish Date: 1996-07-05

GB/T 4440-1998 Replaced

GB/T 4440-1998 Adjustable wrenches

Publish Date: 1998-03-25

GB/T 6289-1999 Replaced

GB/T 6289-1999 Pliers and nippers—Nomenclature

Publish Date: 1999-05-28

GB/T 6290-1999 Replaced

GB/T 6290-1999 Pliers and nippers—General technical requirements

Publish Date: 1999-05-28

GB/T 6291-1999 Replaced

GB/T 6291-1999 Pliers and nippers—Methods of test

Publish Date: 1999-05-28