GB 7291-1987
Replaced
GB 15093-2008
Active
National standards
force_standard
GB 15093-2008 National emblem
GB 15093-2008 National emblem
Basic Information
Standard Code:
GB 15093-2008
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
yes
CCS Name:
Terminology and symbols
ICS Name:
Public information symbols
Publish Date:
2008-06-19
Implement Date:
2009-06-01
Pages:
10 pages
Scope
This standard specifies the technical requirements, test methods, inspection rules, marking, and packaging for the People's Republic of China national emblem intended for hanging (hereinafter referred to as the national emblem). This standard applies to national emblems made of fiber-reinforced plastic or aluminum alloy and intended for hanging. Flat national emblem patterns made of other materials, such as those produced by printing processes, should also comply with the relevant requirements of this standard.
Development Information
Replace the following standards
Superseded by the following standards
Referenced Standards
GB/T 4380-2004 Assessment of departure from roundness—Two-and three-point methods
GB/T 11186.2-1989 Methods for measuring the color of paint films—Part 2:Colour measurement
GB/T 11186.3-1989 Methods for measuring the color of paint films—Part 3:Calculation of color differences
GB/T 11337-2004 Measurement of departures from flatness
中华人民共和国国徽法
中华人民共和国国徽图案说明
中华人民共和国国徽制作说明
GB/T 1449-2005 Fibre-reinforced plastic composites—Determination of flexural properties
GB/T 1720-2020 Circle-drawing test of coating films
GB/T 1733-1993 Determination of resistance to water of films
GB/T 1740-2007 Determination of resistance to heat and humidity of paint films
GB/T 1766-1995 Paint and varnish—Rating schemes of degradation of coats
GB/T 1766-2008 Paints and varnishes—Rating schemes of degradation of coats
GB/T 1771-1991 Paints and varnishes—Determination of resistance to neutral salt spray
GB/T 1771-2007 Paints and varnishes—Determination of resistance to neutral salt spray(fog)
GB/T 3854-1983 Test method for hardness of fiber reinforced plastics by means of a Barcol impressor
GB/T 3854-2005 Test method for hardness of reinforced plastics by means of a Barcol impresser
GB/T 3854-2017 Test method for hardness of reinforced plasticsby means of a Barcol impresser
GB/T 3979-1997 Methods of measuring the color of materials
GB/T 3979-2008 Methods for the measurement of object color
GB/T 6739-1996 Determination of film hardness by pencil test
GB/T 6739-2006 Paints and varnishes—Determination of film hardness by pencil test
GB/T 6739-2022 Paints and varnishes—Determination of film hardness by pencil test
GB/T 9274-1988 Paints and varnishes—Determination of resistance to liquids
GB/T 9754-1988 Paints and varnishes—Measurement of specular gloss of non-metallic paint films at 20°, 60°and 85°
GB/T 9754-2007 Paints and varnishes—Determination of specular gloss of non-metallic paint films at 20°,60°and 85°
GB/T 9754-2025 Paints and varnishes—Determination of gloss value at 20°、60° and 85°
Related Standards
GB/T 1252-1989
Replaced
GB/T 1252-1989 Graphical symbols—Arrows and their use
GB/T 12103-1990
Replaced
GB/T 12103-1990 Procedures for the development and testing of graphical symbols for use on signs
GB/T 14543-1993
Replaced
GB/T 14543-1993 Principles for the visual design of graphical symbols for use on signs
GB 15093-1994
Replaced
GB 15093-1994 National emblem
GB 16690-1996
Replaced