GB/T 25618.1-2010 Active National standards

GB/T 25618.1-2010 Earth-moving machinery—Lubrication fittings—Part 1:Nipple type

GB/T 25618.1-2010 Earth-moving machinery—Lubrication fittings—Part 1:Nipple type

Publish Date: 2010-12-01 Implement Date: 2011-03-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 25618.1-2010

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Construction engineering construction machinery

ICS Name: Earthmoving machinery

Publish Date: 2010-12-01

Implement Date: 2011-03-01

Pages: 6 pages

Scope

This part of GB/T 25618 specifies the threaded joint-type lubricating oil cup and the space required for its use.
This part is applicable to earthmoving machinery as defined in GB/T8498.
Note: The lubricating oil cup is hereinafter referred to as the oil cup.

Development Information

Word Count: 8 Thousand words Pages: 6 pages

Same series standard

GB/T 25618.2-2010 Earth-moving machinery—Lubrication fittings—Part 2:Grease-gun nozzles

Referenced Standards

GB/T 7306.1-2000 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads—Part 1:Parallel internal and taper external threads GB/T 7306.2-2000 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads—Part 2:Taper internal and external threads GB/T 8498-1999 Earth-moving machinery—Basic types—Vocabulary GB/T 8498-2008 Earth-moving machinery—Basic type—Identification and terms and definitions GB/T 8498-2017 Earth-moving machinery—Basic types—Identification and terms and definitions GB/T 9799-1997 Metallic coatings—Electroplated coatings of zinc on iron or steel GB/T 9799-2011 Metallic and other inorganic coatings—Electroplated coatings of zinc with supplementary treatments on iron or steel GB/T 9799-2024 Metallic and other inorganic coatings—Electroplated coatings of zinc with supplementary treatments on iron or steel GB/T 8498-2025 Earth-moving machinery—Basic types—Identification and vocabulary

Adopt standards

ISO 6392-1:1996

Related Standards

GB/T 6375-1986 Replaced

GB/T 6375-1986 Earth-moving machinery—Method of test for the measurement of draw-bar pull

Publish Date: 1986-05-13

GB/T 6572.2-1986 Replaced

GB/T 6572.2-1986 Excavators terminology—Cable operated type

Publish Date: 1986-07-22

GB/T 13331-1991 Replaced

GB/T 13331-1991 Hydraulic excavators—Methods of measuring lift capacity

Publish Date: 1991-12-16

GB/T 13332-1991 Replaced

GB/T 13332-1991 Hydraulic excavators—Methods of measuring tool forces

Publish Date: 1991-12-16

GB/T 14289-1993 Active

GB/T 14289-1993 Earth-moving machinery—Diagnostic ports

Publish Date: 1993-04-17

GB/T 14780-1993 Replaced

GB/T 14780-1993 Earth-moving machinery—Drain, fill and level plugs

Publish Date: 1993-12-27