GB/T 18244-2000
Replaced
GB/T 14686-2008
Active
National standards
GB/T 14686-2008 Asphalt glass felt used in waterproofing
GB/T 14686-2008 Asphalt glass felt used in waterproofing
Basic Information
Standard Code:
GB/T 14686-2008
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Roofing and paving waterproofing and moistureproof materials
ICS Name:
Waterproof
Publish Date:
2008-06-30
Implement Date:
2009-04-01
Pages:
7 pages
Scope
This standard specifies the classification and marking, requirements, test methods, inspection rules, marking, packaging, transportation, and storage of waterproofing membranes made of petroleum asphalt and fiberglass (referred to as asphalt-fiberglass membranes). This standard applies to waterproofing membranes made of fiberglass felt as the base layer, coated with petroleum asphalt, and covered with isolation materials on both sides.
Development Information
Replace the following standards
Referenced Standards
GB/T 328.10-2007 Test methods for building sheets for waterproofing—Part 10:Bitumen,plastic and rubber sheets for waterproofing-watertightness
GB/T 328.11-2007 Test methods for building sheets for waterproofing—Part 11:Bitumen sheets for waterproofing-flow resistance at elevated temperature
GB/T 328.6-1989 Test methods for asphalt waterproof roll roofing—Tensile strength of asphalt
GB/T 328.6-2007 Test methods for building sheets for waterproofing—Part 6:Bitumen sheets for waterproofing-length, width and straightness
GB/T 328.8-2007 Test methods for building sheets for waterproofing—Part 8:Bitumen sheets for waterproofing-tensile properties
GB/T 328.14-2007 Test methods for building sheets for waterproofing—Part 14:Bitumen sheets for waterproofing-flexibility at low temperature
GB/T 328.18-2007 Test methods for building sheets for waterproofing—Part 18:Bitumen sheets for waterproofing-resistance to tearing(nail shank)
GB/T 328.26-2007 Test methods for building sheets for waterproofing—Part 26:Bitumen sheets for waterproofing-dissoulble composite of membrane(impregnated and coated asphalt amount)
Related Standards
GB/T 19889.7-2005
Replaced
GB/T 19889.7-2005 Acoustics—Measurement of sound insulation in buildings and of building elements—Part 7:Field measurements of impact sound insulation of floors
GB/T 19889.1-2005
Active
GB/T 19889.1-2005 Acoustics—Measurement of sound insulation in buildings and of building elements—Part 1:Requirements for laboratory test facilities with suppressed flanking transmission
GB/T 19889.2-2005
Abolished
GB/T 19889.2-2005 Acoustics—Measurement of sound insulation in buildings and of building elements—Part 2:Determination,verification and application of precision data
GB/T 19889.3-2005
Replaced
GB/T 19889.3-2005 Acoustics—Measurement of sound insulation in buildings and of building elements—Part 3:Laboratory measurements of airborne sound insulation of building elements
GB/T 19889.4-2005
Active