GB/T 5655-1985
Abolished
GB/T 23436-2025
Active
National standards
GB/T 23436-2025 Cleaning fluids for automotive windshield
GB/T 23436-2025 Cleaning fluids for automotive windshield
Basic Information
Standard Code:
GB/T 23436-2025
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
The use, maintenance, and repair of highway vehicles
ICS Name:
Road transport
Publish Date:
2025-08-29
Implement Date:
2026-03-01
Pages:
28 pages
Scope
This document specifies the technical requirements and test methods for automotive windshield washer fluid, as well as inspection rules and marking, packaging, transportation, and storage requirements.
This document is applicable to the production and inspection of water-based and hydrophobic automotive windshield washer fluid products.
Development Information
Replace the following standards
Referenced Standards
GB 253-2008 Kerosine
GB/T 443-1989 Lubricating oils for total loss systems L-AN
GB/T 511-1988 Petroleum products and additives—Determination of mechanical impurities—Gravimetric method
GB/T 511-2010 Petroleum,petroleum products and additives—Method for determination of mechanical admixtures
GB/T 699-2015 Quality carbon structure steels
GB/T 2518-1988 Continual hot-dip zinc-coated steel sheets and strips
GB/T 2518-2004 Continuous hot-dip zinc-coated steel sheets and strips
GB/T 2518-2008 Continuously hot-dip zinc-coated steel sheet and strip
GB/T 2518-2019 Continuously hot-dip zinc and zinc alloy coated steel sheet and strip
GB/T 3190-1996 Wrought aluminium and aluminium alloys—Chemical composition limits
GB/T 3190-2008 Wrought aluminium and aluminium alloy——Chemical composition
GB/T 3190-2020 Chemical composition of wrought aluminium and aluminium alloys
GB/T 4756-1998 Petroleum liquids—Manual sampling
GB/T 4756-2015 Method for manual sampling of petroleum liquids
GB/T 5231-2001 Wrought copper and copper alloys chemical composition limits and forms of wrought products
GB/T 5231-2012 Designation and chemical composition of wrought copper and copper alloys
GB/T 5231-2022 Designation and chemical composition of wrought copper and copper alloys
GB/T 6682-2008 Water for analytical laboratory use—Specification and test methods
GB/T 6739-2022 Paints and varnishes—Determination of film hardness by pencil test
GB 9656-2021 Safety technical specification for glazing materials used in power-driven vehicles
GB 15085-1994 Motor vehicles—Windshield wipers and washer systems—Performance requirements and test methods
GB 15085-2013 Motor vehicles-windscreen wiper and washer systems—Performance requirements and test methods
GB/T 42415-2023 Surface active agents—Determination of static interfacial tension
NB/SH/T 0164-2019 Rules for packaging, storage and transportation of petroleum and related products, as well as acceptance and delivery inspection
QB/T 5546-2020 slide glass slide cover slip
SH/T 0069
SH/T 0084-2001 Experimental method on the influence of coolant chemical solutions on organic coatings on automobiles
SH/T 0090
Related Standards
GB/T 5845.10-1986
Replaced
GB/T 5845.10-1986 Marks for urban public transport—Marks for prohibition and general
GB/T 5845.11-1986
Replaced
GB/T 5845.11-1986 Marks for urban public transport—Stop board of bus and trolleybus and tramcar
GB/T 5845.1-1986
Replaced
GB/T 5845.1-1986 Marks for urban public transport—General mark for public transport
GB/T 5845.12-1986
Abolished
GB/T 5845.12-1986 Marks for urban public transport—Stop board for light rail rapid transit
GB/T 5845.2-1986
Replaced