GB/T 1592.2-2008 Replaced National standards

GB/T 1592.2-2008 Agricultural tractors—Rear-mounted power take-off types 1,2 and 3—Part 2:Narrow-track tractors,dimensions for master shield and clearance zone

Publish Date: 2008-07-09 Implement Date: 2009-02-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 1592.2-2008

Standard Type: National standards

Standard Status: Replaced

is_force_gb: no

CCS Name: The power output shaft, traction device, and accessories

ICS Name: Agricultural tractors and traction vehicles

Publish Date: 2008-07-09

Implement Date: 2009-02-01

Pages: 5 pages

Scope

This part of GB/T 1592 specifies the dimensions and clearance range of the rear power take-off shafts of narrow-wheelbase agricultural tractors of types 1 and 2 with a wheelbase of less than or equal to 1,150 mm. This part is applicable to the rear power take-off shafts of agricultural tractors (hereinafter referred to as power take-off shafts).

Development Information

Word Count: 7 Thousand words Pages: 5 pages

Same series standard

GB/T 1592.1-2008 Agricultural tractors—Rear-mounted power take-off types 1,2 and 3—Part 1:General specifications,safety requirements,dimensions for master shield and clearance zone GB/T 1592.3-2008 Agricultural tractors—Rear-mounted power take-off types 1,2 and 3—Part 3:Main PTO dimensions and spline dimensions,location of PTO

Replace the following standards

GB/T 1592-2003 Agricultural tractors—Rear-mounted power take-off—Types 1,2 and 3

Superseded by the following standards

GB/T 1592.2-2016 Agricultural tractors—Rear-mounted power take-off types 1,2,3 and 4—Part 2:Narrow-track tractors,dimensions for master shield and clearance zone

Referenced Standards

GB/T 1592.1-2008 Agricultural tractors—Rear-mounted power take-off types 1,2 and 3—Part 1:General specifications,safety requirements,dimensions for master shield and clearance zone GB/T 19408.1-2003 Agricultural vehicles—Mechanical connections between towed and towing vehicles—Part 1:Dimensions of hitch-hooks ISO 5673-2 ISO 6489-2 ISO 6489-3 ISO 6489-4 ISO 24347 GB/T 3871.3-1993 Test methods for agricultural wheeled and tracklaying tractors—Part 3:PTO power tests GB/T 3871.3-2006 Agricultural tractors—Test procedures—Part 3:Power tests for power take-off GB/T 3871.3-2025 Agricultural tractors—Test procedures—Part 3:Power tests for power take-off

Adopt standards

ISO 500-2:2004

Related Standards

GB/T 5262-1985 Replaced

GB/T 5262-1985 Measuring methods for agricultural machinery testing conditions—general rules

Publish Date: 1985-07-25

GB 7121-1986 Replaced

GB 7121-1986 Agricultural and forestry wheeled tractors—Protective structures—Test method in the strength and acceptance conditions

Publish Date: 1986-12-30

GB 1593.4-1987 Abolished

GB 1593.4-1987 Agricultural wheeled tractors—Three-point linkage—Part 4:Category 0

Publish Date: 1987-01-02

GB/T 13875-1992 Replaced

GB/T 13875-1992 The general specification for walking tractors

Publish Date: 1992-11-14

GB/T 13876-1992 Replaced

GB/T 13876-1992 Agricultural wheeled tractors—Evaluation criteria of whole body vibration of the operator

Publish Date: 1992-11-14

GB/T 13878-1992 Abolished

GB/T 13878-1992 Agricultural tractors and self-propelled machines—Performance of heating and ventilation systems in closed cabs—Method of test

Publish Date: 1992-11-14