GB/T 5262-1985
Replaced
GB/T 3871.3-2025
Active
National standards
GB/T 3871.3-2025 Agricultural tractors—Test procedures—Part 3:Power tests for power take-off
GB/T 3871.3-2025 Agricultural tractors—Test procedures—Part 3:Power tests for power take-off
Basic Information
Standard Code:
GB/T 3871.3-2025
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Tractor
ICS Name:
Agricultural tractors and traction vehicles
Publish Date:
2025-06-30
Implement Date:
2026-01-01
Pages:
20 pages
Scope
This document specifies the test procedure for the effective power of the power take-off shaft of agricultural tractors.
This document is applicable to wheeled and tracked agricultural tractors.
Development Information
Same series standard
GB/T 3871.4-2025 Agricultural tractors—Test procedures—Part 4:Rear three-point linkage lifting capacity
GB/T 3871.7-2025 Agricultural tractors—Test procedures—Part 7:Operator′s field of vision to the front
GB/T 3871.9-2025 Agricultural tractors—Test procedures—Part 9:Power tests for drawbar
GB/T 3871.15-2025 Agricultural tractors—Test procedures—Part 15: Centre of gravity
Replace the following standards
Referenced Standards
GB/T 1592.1-2008 Agricultural tractors—Rear-mounted power take-off types 1,2 and 3—Part 1:General specifications,safety requirements,dimensions for master shield and clearance zone
GB/T 1592.1-2016 Agricultural tractors—Rear-mounted power take-off types 1,2,3 and 4—Part 1:General specifications,safety requirements,dimensions for master shield and clearance zone
GB/T 1592.2-2008 Agricultural tractors—Rear-mounted power take-off types 1,2 and 3—Part 2:Narrow-track tractors,dimensions for master shield and clearance zone
GB/T 1592.2-2016 Agricultural tractors—Rear-mounted power take-off types 1,2,3 and 4—Part 2:Narrow-track tractors,dimensions for master shield and clearance zone
GB/T 1592.3-2008 Agricultural tractors—Rear-mounted power take-off types 1,2 and 3—Part 3:Main PTO dimensions and spline dimensions,location of PTO
GB/T 1592.3-2016 Agricultural tractors—Rear-mounted power take-off types 1,2,3 and 4—Part 3:Main PTO dimensions and spline dimensions,location of PTO
GB/T 6960.1-1995 Tractor terminology—Complete tractor
GB/T 6960.1-2007 Tractor terminology—Part 1:Complete tractor
GB 17930-1999 Unleaded petrol(gasoline)for motor vehicles
GB 17930-2006 Gasoline for motor vehicles
GB 17930-2011 Gasoline for motor vehicles
GB 17930-2013 Gasoline for motor vehicles
GB 17930-2016 Gasoline for motor vehicles
GB/T 19147-2003 Automobile diesel fuels
GB 19147-2009 Automobile diesel fuels
GB 19147-2013f Automobile diesel fuels(Ⅳ)
GB 19147-2013 Automobile diesel fuels(Ⅴ)
GB 19147-2016 Automobile diesel fuels
GB 29518-2013 Diesel engines NOx reduction agent—Aqueous urea solution(AUS 32)
JB/T 7282-2016 The selection of lubricating oil varieties and specifications for tractors, JB/T 7282-2016
JB/T 7282-2004 The selection of varieties and specifications of lubricating oil for tractors according to JB/T 7282-2004
ISO 8759-3
GB/T 6960.1-2025 Tractor terminology—Part 1:Complete tractor
Adopt standards
ISO 789-1:2018
Related Standards
GB 7121-1986
Replaced
GB 7121-1986 Agricultural and forestry wheeled tractors—Protective structures—Test method in the strength and acceptance conditions
GB 1593.4-1987
Abolished
GB 1593.4-1987 Agricultural wheeled tractors—Three-point linkage—Part 4:Category 0
GB/T 13875-1992
Replaced
GB/T 13875-1992 The general specification for walking tractors
GB/T 13876-1992
Replaced
GB/T 13876-1992 Agricultural wheeled tractors—Evaluation criteria of whole body vibration of the operator
GB/T 13878-1992
Abolished