GB/T 10051.5-2010 Active National standards

GB/T 10051.5-2010 Lifting hooks—Part 5:Shank hooks with point

GB/T 10051.5-2010 Lifting hooks—Part 5:Shank hooks with point

Publish Date: 2011-01-10 Implement Date: 2011-09-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 10051.5-2010

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Cranes

ICS Name: Crane equipment accessories

Publish Date: 2011-01-10

Implement Date: 2011-09-01

Pages: 10 pages

Scope

This part of GB/T 10051 specifies the type, dimensions, and technical requirements of straight-shaft single hooks.
This part applies to straight-shaft single hooks (hereinafter referred to as single hooks) for lifting machinery as specified in GB/T 10051.1.

Development Information

Word Count: 18 Thousand words Pages: 10 pages

Same series standard

GB/T 10051.1-2010 Lifting hooks—Part 1:Mechanical properties,lifting capacities,stresses and materials GB/T 10051.2-2010 Lifting hooks—Part 2:Technical conditions for forged hooks GB/T 10051.3-2010 Lifting hooks—Part 3:Inspection of forged hooks in service GB/T 10051.4-2010 Lifting hooks—Part 4:Blanks of shank hook with point GB/T 10051.6-2010 Lifting hooks—Part 6:Blanks of ramshorn shank hooks GB/T 10051.7-2010 Lifting hooks—Part 7:Ramshorn shank hooks GB/T 10051.8-2010 Lifting hooks—Part 8:Blanks of cross pieces for hooks GB/T 10051.9-2010 Lifting hooks—Part 9:Cross pieces GB/T 10051.10-2010 Lifting hooks—Part 10:Hook nuts GB/T 10051.11-2010 Lifting hooks—Part 11:Securing plates for hook nuts GB/T 10051.12-2010 Lifting hooks—Part 12:Safety latch for lifting hook GB/T 10051.13-2010 Lifting hooks—Part 13:Technical conditions for laminated hooks GB/T 10051.14-2010 Lifting hooks—Part 14:Inspection of laminated hooks in service GB/T 10051.15-2010 Lifting hooks—Part 15:Laminated hooks with point

Replace the following standards

GB/T 10051.5-1988 Lifting hooks--Shank hooks with point

Referenced Standards

GB/T 10051.4-2010 Lifting hooks—Part 4:Blanks of shank hook with point GB/T 196-2003 General purpose metric screw threads—Basic dimensions GB/T 10051.2-2010 Lifting hooks—Part 2:Technical conditions for forged hooks GB/T 10051.2-1988 Lifting hooks--Technical conditions of shank hook GB/T 196-2025 General purpose metric screw threads—Basic dimensions

Adopt standards

DIN 15401-2:1983

Related Standards

GB/T 3220-1982 Replaced

GB/T 3220-1982 Dimensional and capacity series for freight container spreader

Publish Date: 1982-10-11

GB/T 5972-1986 Replaced

GB/T 5972-1986 Wire rope for lifting appliances—Code of practice for examination and discard

Publish Date: 1986-04-03

GB/T 5973-1986 Replaced

GB/T 5973-1986 Cuneiform connector for use with steel wire ropes

Publish Date: 1986-04-03

GB/T 5974.1-1986 Replaced

GB/T 5974.1-1986 General purpose thimbles for use with steel wire ropes

Publish Date: 1986-04-03

GB/T 5974.2-1986 Replaced

GB/T 5974.2-1986 Heavy thimbles for use with steel wire ropes

Publish Date: 1986-04-03

GB/T 5975-1986 Replaced

GB/T 5975-1986 Clamping plates for fixing steel wire ropes

Publish Date: 1986-04-03