GB/T 10051.15-2010 Active National standards

GB/T 10051.15-2010 Lifting hooks—Part 15:Laminated hooks with point

GB/T 10051.15-2010 Lifting hooks—Part 15:Laminated hooks with point

Publish Date: 2011-01-10 Implement Date: 2011-09-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 10051.15-2010

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Cranes

ICS Name: Crane equipment accessories

Publish Date: 2011-01-10

Implement Date: 2011-09-01

Pages: 5 pages

Scope

This part of GB/T 10051 specifies the lifting capacity and main dimensions, technical requirements, and inspection rules for laminated single hooks.
This part applies to laminated single hooks (hereinafter referred to as single hooks) used in lifting machinery to lift molten metals (in steel drums).

Development Information

Word Count: 8 Thousand words Pages: 5 pages

Same series standard

GB/T 10051.1-2010 Lifting hooks—Part 1:Mechanical properties,lifting capacities,stresses and materials GB/T 10051.2-2010 Lifting hooks—Part 2:Technical conditions for forged hooks GB/T 10051.3-2010 Lifting hooks—Part 3:Inspection of forged hooks in service GB/T 10051.4-2010 Lifting hooks—Part 4:Blanks of shank hook with point GB/T 10051.5-2010 Lifting hooks—Part 5:Shank hooks with point GB/T 10051.6-2010 Lifting hooks—Part 6:Blanks of ramshorn shank hooks GB/T 10051.7-2010 Lifting hooks—Part 7:Ramshorn shank hooks GB/T 10051.8-2010 Lifting hooks—Part 8:Blanks of cross pieces for hooks GB/T 10051.9-2010 Lifting hooks—Part 9:Cross pieces GB/T 10051.10-2010 Lifting hooks—Part 10:Hook nuts GB/T 10051.11-2010 Lifting hooks—Part 11:Securing plates for hook nuts GB/T 10051.12-2010 Lifting hooks—Part 12:Safety latch for lifting hook GB/T 10051.13-2010 Lifting hooks—Part 13:Technical conditions for laminated hooks GB/T 10051.14-2010 Lifting hooks—Part 14:Inspection of laminated hooks in service

Referenced Standards

GB/T 10051.13-2010 Lifting hooks—Part 13:Technical conditions for laminated hooks GB/T 699-1999 Quality carbon structural steels GB/T 699-2015 Quality carbon structure steels GB/T 700-1988 Carbon structural steels GB/T 700-2006 Carbon structural steels GB/T 985.1-2008 Recommended joint preparation for gas welding,manual metal arc welding,gas-shield arc welding and beam welding GB/T 1591-1994 High strength low alloy structural steels GB/T 1591-2008 High strength low alloy structural steels GB/T 1591-2018 High strength low alloy structural steels GB/T 10051.14-2010 Lifting hooks—Part 14:Inspection of laminated hooks in service

Related Standards

GB/T 3220-1982 Replaced

GB/T 3220-1982 Dimensional and capacity series for freight container spreader

Publish Date: 1982-10-11

GB/T 5972-1986 Replaced

GB/T 5972-1986 Wire rope for lifting appliances—Code of practice for examination and discard

Publish Date: 1986-04-03

GB/T 5973-1986 Replaced

GB/T 5973-1986 Cuneiform connector for use with steel wire ropes

Publish Date: 1986-04-03

GB/T 5974.1-1986 Replaced

GB/T 5974.1-1986 General purpose thimbles for use with steel wire ropes

Publish Date: 1986-04-03

GB/T 5974.2-1986 Replaced

GB/T 5974.2-1986 Heavy thimbles for use with steel wire ropes

Publish Date: 1986-04-03

GB/T 5975-1986 Replaced

GB/T 5975-1986 Clamping plates for fixing steel wire ropes

Publish Date: 1986-04-03