GB/T 14481-2008 Active National standards

GB/T 14481-2008 Test procedure for single-phase synchronous machines

Publish Date: 2008-07-16 Implement Date: 2009-04-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 14481-2008

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Synchronous motor

ICS Name: Rotating motor comprehensive

Publish Date: 2008-07-16

Implement Date: 2009-04-01

Pages: 23 pages

Scope

This standard specifies the test methods for single synchronous motors. This standard is applicable to single synchronous motors (generators and motors) with a power of 200 kW or less and a voltage of 690 V or less. It is not applicable to single synchronous motors without DC excitation windings (such as permanent magnet motors, reluctance motors, etc.).

Development Information

Word Count: 40 Thousand words Pages: 23 pages

Replace the following standards

GB/T 14481-1993 Test procedure for single-Phase synchronous machine

Referenced Standards

GB 4343.1-2003 Electromagnetic compatibility—Requirements for household appliances, electric tools and similar apparatus—Part 1:Emission GB 4343.2-1999 Electromagnetic compatibility—Requirements for household appliances, electric tools and similar apparatus—Part 2:Immunity—Product family standard GB 4824-2004 Industrial, scientific and medical(ISM) radio-frequency equipment—Electromagnetic disturbance characteristics—Limits and methods of measurement GB/T 6113.101-2008 Specification for radio disturbance and immunity measuring apparatus and methods—Part 1-1:Radio disturbance and immunity measuring apparatus—Measuring apparatus GB/T 6113.102-2008 Specification for radio disturbance and immunity measuring apparatus and methods—Part 1-2:Radio disturbance and immunity measuring apparatus—Ancillary equipment—Conducted disturbances GB/T 6113.103-2008 Specification for radio disturbance and immunity measuring apparatus and methods—Part 1-3:Radio disturbance and immunity measuring apparatus—Ancillary equipment—Disturbances power GB/T 6113.104-2008 Specification for radio disturbance and immunity measuring apparatus and methods—Part 1-4:Radio disturbance and immunity measuring apparatus—Ancillary equipment—Radiated disturbances GB/T 6113.105-2008 Specification for radio disturbance and immunity measuring apparatus and methods—Part 1-5:Radio disturbance and immunity measuring apparatus—Antenna calibration test sites for 30 MHz to 1 000 MHz GB/T 10069.1-2006 Measurement of the airborne noise emitted by rotating electrical machines and the noise limits—Part 1:Method for the measurement of airborne noise emitted by rotating electrical machines IEC 60034-22:1996 GB 755-2000 Rotating electrical machines—Rating and performance GB/T 755-2008 Rotating electrical machines—Rating and performance GB/T 755-2019 Rotating electrical machines—Rating and performance GB/T 755.2-2003 Methods for determining losses and efficiency of rotating electrical machinery from tests(excluding machines for traction vehicles) GB 10068-2000 Mechanical vibration of certain machines with shaft heights 56mm and higher—Measurement,evaluation and limits of vibration GB/T 10068-2008 Mechanical vibration of certain machines with shaft heights 56 mm and higher—Measurement,evaluation and limits of vibration severity GB/T 10068-2020 Mechanical vibration of certain machines with shaft heights 56 mm and higher—Measurement,evaluation and limits of vibration severity JB/T 9615.2-2000 The inter-turn insulation test limit value for the loose-wound winding of low-voltage motors JB/T 9615.1-2000 GB/T 755-2025 Rotating electrical machines—Rating and performance

Related Standards

GB/T 7346-1998 Replaced

GB/T 7346-1998 Basic outline constructional type for control motors and feedback components

Publish Date: 1998-01-19

GB/T 4772.1-1999 Replaced

GB/T 4772.1-1999 Dimensions and output series for rotating electrical machines—Part 1:Frame numbers 56 to 400 and flange numbers 55 to 1080

Publish Date: 1999-02-26

GB/T 4772.2-1999 Active

GB/T 4772.2-1999 Dimensions and output series for rotating electrical machines— Part 2:Frame numbers 355 to 1000 and flange numbers 1180 to 2360

Publish Date: 1999-02-26

GB/T 4772.3-1999 Active

GB/T 4772.3-1999 Dimensions and output series for rotating electrical machines— Part 3:Samll built-in motors flange numbers BF10 to BF50

Publish Date: 1999-02-26

GB 10068-2000 Replaced

GB 10068-2000 Mechanical vibration of certain machines with shaft heights 56mm and higher—Measurement,evaluation and limits of vibration

Publish Date: 2000-01-03

GB/T 17948.1-2000 Replaced

GB/T 17948.1-2000 Rotating electrical machines—Functional evaluation of insulation systems—Test procedures for wire-wound windings—Thermal evaluation and classification

Publish Date: 2000-01-03