GB/T 45906.10-2025
Active
National standards
GB/T 45906.10-2025 Substation secondary system—Part 10:Test and detection
GB/T 45906.10-2025 Substation secondary system—Part 10:Test and detection
Price:
$ 50.00
Basic Information
Standard Code:
GB/T 45906.10-2025
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Electricity
ICS Name:
Substations, surge arrestors
Publish Date:
2025-08-01
Implement Date:
2026-02-01
Pages:
24 pages
Scope
This document specifies the general requirements for the detection of protection and control systems and related equipment in substation secondary systems, the on-site monitoring system, the centralized monitoring system of substations (hereinafter referred to as the "centralized control system"), the detection of electrical operation errors, and the detection conditions, as well as the content, methods, and requirements of type testing, factory inspection, integration testing, and on-site inspection.
This document is applicable to the design, development, testing, construction, operation, maintenance, and repair of substation secondary systems.
Development Information
Same series standard
GB/T 45906.1-2025 Substation secondary system—Part 1:General requirement
GB/T 45906.2-2025 Substation secondary system—Part 2:Data and model
GB/T 45906.3-2025 Substation secondary system—Part 3:Communication message specification
GB/T 45906.4-2025 Substation secondary system—Part 4:Cyber security protection
GB/T 45906.5-2025 Substation secondary system—Part 5:Protection and control system with their equipment's requirements
GB/T 45906.6-2025 Substation secondary system—Part 6:Substation monitoring and control system
GB/T 45906.7-2025 Substation secondary system—Part 7:Centralized monitoring and control system
GB/T 45906.8-2025 Substation secondary system—Part 8:Preventing electric mal-operation
GB/T 45906.9-2025 Substation secondary system—Part 9:Construction specifications
Referenced Standards
DL/T 282-2018 Assembly unit technical specification
DL/T 282-2012 DL/T 282-2012 Integration Unit Technical Conditions
DL/T 478-2013 General Technical Requirements for Relay Protection and Safety Automatic Devices
DL/T 478-2010 General Technical Requirements for Relay Protection and Safety Automatic Devices
DL/T 478-2001 Static General Technical Requirements for Relay Protection and Safety Automatic Devices
DL/T 553-2013 Electric Power System Dynamic Recording Device General Technical Specification
DL/T 553-1994 Technical Guidelines for Dynamic Record of Power System Faults in 220-500kV Power Systems
DL/T 634.5104-2009 Transmission equipment and systems Part 5-104: Transmission protocol specifications using IEC 60870-5-101 network access with standard transmission protocol set
DL/T 634.5104-2002 Remote-control equipment and systems Part 5-104: Transmission protocols using the IEC 60870-5-101 network access subset for standard transmission protocol
DL/T 687-2010 Microcomputer-based Electrical Misoperation Prevention Operating System General Technical Specification
DL/Z 860.1-2018 DL/Z 860.1-2018 Electric power automation communication networks and systems Part 1: General introduction
DL/Z 860.1-2004 Substation communication networks and systems - Part 1: General introduction
DL/Z 860.2-2006 Substation communication networks and systems - Part 2: Terminology
DL/T 860.3-2004 Communication networks and systems in substations-Part 3:General requirements
DL/T 860.4-2018 Electric power automation communication networks and systems - Part 4: Systems and project management
DL/T 860.4-2004 Substation communication networks and systems - Part 4: System and project management
DL/T 860.6-2012 DL/T 860.6-2012 Electric Power Enterprise Automation Communication Network and System Part 6: Communication Configuration Description Language Related to Intelligent Electronic Devices in Substation
DL/T 860.6-2008 Substation communication network and system - Part 6: Communication configuration description language related to intelligent electronic devices in substation
DL/T 860.10-2018 Part 10 of the guidelines for electric power automation communication networks and systems: Conformance testing
DL/T 860.10-2006 Substation communication networks and systems - Part 10: Conformance testing
DL/T 860.71-2014 Power automation communication networks and systems - Part 7-1: Basic communication architecture principles and models
DL/T 860.71-2006 Substation communication networks and systems - Part 7-1: Basic communication architecture and models for substation and feeder equipment
DL/T 860.72-2013 Power automation communication networks and systems - Part 7-2: Basic information and communication structure - Abstract communication service interface (ACSI)
DL/T 860.72-2004 Substation communication networks and systems - Part 7-2: Basic communication structure for substation and feeder equipment - Abstract communication service interface (ACSI)
DL/T 860.73-2013 Power automation communication networks and systems - Part 7-3: Basic communication structure for public data classes
DL/T 860.73-2004 Substation communication networks and systems - Part 7-3: Basic communication structure for substation and feeder equipment - Public data classes
DL/T 860.74-2014 Electric power automation communication networks and systems - Part 7-4: Basic communication structure compatible logical node classes and data classes
DL/T 860.74-2006 Substation communication networks and systems - Part 7-4: Basic communication structure for substation and feeder equipment - Compatibility of logical node classes and data classes
DL/T 860.81-2016 DL/T 860.81-2016 Electricity automation communication network and system Part 8-1: Specific communication service mapping (SCSM) - Mapping to MMS (ISO 9506-1 and ISO 9506-2) and ISO/IEC 8802-3
DL/T 860.81-2006 Substation Communication Network and System Part 8-1: Mapping of Specific Communication Services (SCSM) to MMS (ISO 9506-1 and ISO 9506-2) and ISO/IEC 8802-3
DL/T 860.91-2006 Substation communication networks and systems - Part 9-1: Mapping of specific communication services (SCSM) on a unidirectional multipoint point-to-point serial communication link for sampled values
DL/T 860.92-2016 Electric power automation communication networks and systems - Part 9-2: Specific communication service mapping (SCSM) - Sampling values based on ISO/IEC 8802-3
DL/T 860.92-2006 Substation communication networks and systems - Part 9-2: Mapping of specific communication services mapping (SCSM) to ISO/IEC 8802-3 to sample values only
DL/T 860.801-2016 Electric power automation communication networks and systems - Part 80-1: Application guidelines for exchanging information based on CDC data model using DL/T 634.5101 or DL/T 634.5104 switching system
DL/T 860.901-2014 Power automation communication network and system Part 901: Application of DL/T 860 in inter-substation communication. (Note: English translation provided)
DL/T 860.904-2018 Power automation communication networks and systems - Part 90-4: Network engineering guidelines
DL/T 860.7410-2016 Power Automation Communication Networks and Systems Part 7-410: Basic Communication Architecture for Monitoring and Control of Hydropower Plants
DL/T 860.7420-2012 Electricity enterprise automation communication network and system Part 7-420: Basic communication structure Distributed energy logic nodes
DL/Z 860.7510-2016 Power Automation Communication Networks and Systems Part 7-510: Basic Communication Architecture, Hydropower Plant Modeling Principles and Application Guidelines
DL/T 995-2016 DL/T 995-2016 Inspection Regulations for Relay Protection and Automatic Equipment for Power Grid Safety
DL/T 995-2006 The inspection regulations for relay protection and automatic equipment for power grid security
DL/T 1100.1-2018 Power system time synchronization system - Part 1: Technical specification
DL/T 1100.1-2009 Time synchronism systems of power system Part 1:Technical specifications
DL/T 1241-2013 Electric power industry Ethernet switch technical specification
DL/T 1241-2024 Electric power industry Ethernet switch technical specification
DL/T 1404-2015 Substation monitoring system technical specifications for preventing electrical misoperation
DL/T 1405.3-2018 Intelligent substation synchronization phase-measurement device - Part 3: Detection specification
DL/T 1411-2015 Smart High Voltage Equipment Technical Guidelines
DL/T 1430-2015 Substation equipment online monitoring system technical guidelines
DL/T 1455-2015 The security requirements and evaluation techniques for power system control software
DL/T 1498.1-2016 "Online Monitoring Device Specification for Substation Equipment - Part 1: General Principles"
DL/T 1498.2-2016 Online Monitoring Device Technical Specification for Substation Equipment - Part 2: Online Monitoring Device for Dissolved Gases in Transformer Oil
DL/T 1498.3-2016 Equipment Online Monitoring Device Specification Part 3: Capacitive Equipment and Metal Oxide Arc Fault Insulation Online Monitoring Devices for Substations
DL/T 1498.4-2017 "Part 4 of the technical specification for online monitoring devices for substation equipment: Partial discharge high-frequency and online monitoring devices for gas-insulated metal-enclosed switching equipment"
DL/T 1510-2016 Power System Optical Transport Network (OTN) Test Specification
DL/T 1510-2024 DL/T 1510-2024 Electric power system optical transport network (OTN) testing specification
DL/T 1651-2016 The inspection regulations for optical channel of relay protection
DL/T 1664-2016 DL/T 1664-2016 Field Inspection Regulations for Electric Energy Measurement Equipment
DL/T 1900-2018 Smart Substation Network Recording Analysis Device Technical Specification
DL/T 1912-2018 Intelligent Substation Ethernet Switch Technical Specification
DL/T 1940-2018 Intelligent Substation Ethernet Switch Test Specification
DL/T 1950-2018 Substation data communication network gateway testing specification
DL/T 2144.3-2022 Substation automation system and equipment testing specification Part 3: Measurement and control devices
NB/T 11205-2023 Substation Relay Protection Comprehensive Record and Smart Operation and Maintenance Device Detection Specification
NB/T 42015-2013 Smart Substation Network Message Recording and Analysis Device Technical Specification
YD/T 900
YD/T 1099-2013 Ethernet switch technical requirements
YD/T 1238-2002 Requirements for Multi-service Transport Node Technology based on SDH
YD/T 1276-2003 Testing method for multi-service transport node based on SDH
YD/T 1299-2016 YD/T 1299-2016 Synchronized Digital Hierarchy (SDH) Network Performance Technical Requirements Jitter and Padding
YD/T 1299-2004 YD/T 1299-2004 Synchronized Digital Hierarchy (SDH) Network Performance Technical Requirements - Jitter and Padding
YD/T 1992-2009 Testing method for Multi-service Transport Node (MSTN) based on synchronous digital hierarchy (SDH) Interconnection Part
YD/T 2148-2010 YD/T 2148-2010 Optical Transport Network (OTN) Test Methods
YD/T 2485-2013 N×100Gbit/s optical wavelength division multiplexing (WDM) system technical requirements
YD/T 2489-2013 Reconfigurable Optical Add-Drop Multiplexer (ROADM) device testing method
YD/T 2649-2013 Testing method for N×100Gbit/s optical wavelength division multiplexing (WDM) system
Related Standards
GB/T 14598.7-1995
Abolished
GB/T 15576-1995
Replaced
GB/T 15576-1995 The specifications of low-voltage reactive power steady compensation equipments
GB 8286-1996
Replaced
GB 8286-1996 Mining flameproof movable substations
GB/T 16896.1-1997
Replaced
GB/T 16896.1-1997 Digital recorders for measurements in high—Voltage impulse tests—Part 1:Requirements for digital recorders
GB 2314-1997
Replaced
GB 2314-1997 General technical requirements for electric power fittings
GB/T 17467-1998
Replaced